JCB 3CX Eco
The JCB 3CX Eco is a backhoe loader with an operating weight of 17,861.9 lb (8,102 kg), and a 81 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the JCB 3CX Eco sits in the middle of its class:
- Engine power 81 hp less powerful than 56% (n=282)
Not positioned on dig depth — withheld or unpublished for this machine.
01 Engine Specification
| Emissions Certification | Tier IV | |
|---|---|---|
| Rated Engine Speed | 1200rpm | |
| Gross Power | 81hp | 60.5kw |
02 Operational Specification
| Operating Weight | 17861.9lb | 8102kg |
|---|---|---|
| Hydraulic System Fluid Capacity | 43.6gal | 165L |
03 Transmission Specification
| Max Speed | 4.7mph | 7.5km/h |
|---|
04 Dimensions Dimensions
| Ground Clearance | 1.22ft in | 370mm |
|---|---|---|
| Cab Roof Height | 9.95ft in | 3.03m |
| Width | 92.52in | 2350mm |
| Total Travel Length | 221.26in | 5620mm |
| Travel Clearance | 142.13in | 3.61m |
| Axle Centreline Distance | 7.12ft in | 2.17m |
| Kingpost Clearance | 1.71ft in | 0.52m |
| Rear Frame Width | 7.71ft in | 2.35m |
| Slew Centre To Rear Axle Center Distance | 4.47ft in | 1.36m |
| Stabiliser Feet Clearance | 1.22ft in | 0.37m |
| Steering Wheel Centre Height | 6.37ft in | 1.94m |
05 Loader Dimensions
| Reach At Max Dump Height | 21.4ft in | 6520mm |
|---|---|---|
| Load Over Height | 10.5ft in | 3.2m |
Data notes
Derived value. engine power was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.