Specification sheet Backhoe Loader Ref jcb-2cx-streetmaster-loader-backhoe
JCB 2CX Streetmaster
The JCB 2CX Streetmaster is a backhoe loader with a 69.1 hp engine, a 0.79 yd³ (0.6 m³) bucket, and a dig depth of 10.02 ft (3,053 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
69.1hp
51.53kW
Net Power Bucket capacity
0.79yd³
0.6m³
Dig depth
10.02ft
3,053mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the JCB 2CX Streetmaster sits below the median for its class:
- Engine power 69 hp less powerful than 74% (n=282)
- Dig depth 10 ft shallower-digging than 91% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Gross Power | 74.2hp | 55.4kw |
|---|---|---|
| Net Power | 69.1hp | 51.6kw |
| Power Measured @ | 2000rpm | |
| Torque Measured @ | 1200rpm | |
| Net Max Torque | 300lb ft | 406.8Nm |
| Displacement | 268.6cu in | 4.4L |
02 Operational Specification
| Fuel Capacity | 22gal | 83L |
|---|---|---|
| Hydraulic System Fluid Capacity | 22gal | 83L |
| Oil System Fluid Capacity | 4gal | 15L |
| Cooling System Fluid Capacity | 4.8gal | 18L |
| Transmission Fluid Capacity | 4.5gal | 17L |
| Front Axle Fluid Capacity | 2.4gal | 9L |
| Rear Axle Fluid Capacity | 2.4gal | 9L |
| Tire Size Front - 2wd / 4wd | 12.5x18x10 | |
| Rear Tires Size 2wd/4wd | 12.5x18x10 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 95amps |
03 Transmission Specification
| Transmission Type | Syncroshuttle | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21.3mph | 34.2km/h |
| Max Speed Reverse | 21.3mph | 34.2km/h |
04 Hydraulic Specification
| Pump Type | open centre system | |
|---|---|---|
| Pump Flow Capacity | 20.9gal/min | 79L/min |
| Relief Valve Pressure | 3335psi | 22994kPa |
05 Backhoe Dimensions
| Load Height - Std | 9.22ft in | 2809mm |
|---|---|---|
| Reach From Swivel - Std | 13.06ft in | 3980mm |
| Dig Depth - Std | 10.02ft in | 3053mm |
| Reach At Load Height - Std | 4.62ft in | 1406mm |
| Load Height - Ext | 10.62ft in | 3235mm |
| Bucket Dig Force - Ext | 9259lb | 4199.82kg |
| Bucket Dig Force - Std | 9259lb | 4199.82kg |
| Dig Depth - Ext | 12.15ft in | 3701mm |
| Reach At Load Height - Ext | 6.23ft in | 1897mm |
| Load At Max Lift - Ext | 1607.17lb | 729kg |
| Load At Max Lift - Std | 1810lb | 821kg |
| Reach From Swivel - Ext | 15.1ft in | 4600mm |
06 Dimensions Dimensions
| Transport Length | 17.72ft in | 5400mm |
|---|---|---|
| Transport Width | 6.07ft in | 1850mm |
| Transport Height | 8.93ft in | 2720mm |
| Wheelbase | 6.53ft in | 1990mm |
| Ground Clearance | 1.02ft in | 310mm |
| Height To Top Of Suspended Cab | 8.7ft in | 2650mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 6.57ft in | 2000mm |
|---|---|---|
| Reach At Max Dump Height | 2.73ft in | 830mm |
| Dig Depth | 3.94in | 100mm |
| Bucket Breakout Force | 11162lb | 49.66kN |
| Bucket Width | 72.84in | 1850mm |
| Bucket Capacity | 0.79yd3 | 0.6m3 |
| Lift Capacity At Full Height | 4624lb | 2097.42kg |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.