Specification sheet Backhoe Loader Ref jcb-1cx-loader-backhoe

JCB 1CX

The JCB 1CX is a backhoe loader with a 47 hp engine, and a dig depth of 8.37 ft (2,551 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Engine power
47hp
35.05kW
Net Power
Dig depth
8.37ft
2,551mm

Where it sits in its classpercentile · backhoe loaders

Among 294 backhoe loaders , the JCB 1CX sits at the compact end of its class:

  • Engine power 47 hp less powerful than 89% (n=282)
  • Dig depth 8.4 ft shallower-digging than 96% (n=256)

Scale drawingdrawn to scale · mm

2252B180C3307A
Side elevation
2252B1430D
Front elevation

01 Electrical System Specification

Pre-Wire Beacon
Gauges Fuel Level, Hour meter
Front Working Lights 2 adjustable
Rear Working Lights 2 adjustable
Battery 72A/hour
Alternator 50amps

02 Engine Specification

Emissions Certification Stage EC Stage IIIA
Number Of Cylinders 4
Rated Engine Speed 2800rpm
Engine Make 2257
Engine Model 104-22
Net Power 47hp 35.1kw
Gross Power 50hp 37.3kw
Power Measured @ 2800rpm
Torque Measured @ 2000rpm
Fuel Type Replaceable cartridge plus water/sediment separator prefilter
Net Max Torque 99.6lb ft 135Nm
Aspiration Natural
Displacement 134.3cu in 2.2L

03 Capacities Specification

Engine Oil With Filter 2.6gal 9.6L
Fuel Tank 11.9gal 45L
Cooling System 2.2gal 8L

04 Operational Specification

Fixed Dipper_Long Arms 6997.5lb 3174kg
Fixed Dipper_Shortarms 6962.2lb 3158kg
Extended Dipper_Short Arms 7138.6lb 3238kg
Extended Dipper_Long Arms 7173.9lb 3254kg
Operating Weight 4wd 6150lb 2789.6kg
Fuel Capacity 11.9gal 45L
Hydraulic System Fluid Capacity 11.9gal 45L
Oil System Fluid Capacity 1.4gal 5L
Cooling System Fluid Capacity 2.2gal 8L
Turning Radius
Tire Size Front - 2wd / 4wd 7x15
Rear Tires Size 2wd/4wd 7x15
Operating Voltage 12V

05 Transmission Specification

Manufacturers Description Danfoss / Rexroth
Transmission Type Hydrostatic
Number Of Forward Gears 1
Number Of Reverse Gears 1
Max Speed - Forward 6.9mph 11km/h
Max Speed Reverse 6.9mph 11km/h

06 Hydraulic Specification

Pump Flow Capacity 11.9gal/min 45L/min
Relief Valve Pressure 3000psi 20684.3kPa

07 Backhoe Dimensions

Load Height - Std 7.71ft in 2348mm
Reach From Swivel - Std 11.1ft in 3383mm
Dig Depth - Std 8.37ft in 2551mm
Reach At Load Height - Std 5.88ft in 1792mm
Standard Max Dig Depth 8.37ft in 2550mm
Reach – Ground Level To Rear Wheel Center 13.92ft in 4.24m
Maximum Load Over Height 7.71ft in 2.35m
Reach – Ground Level To Slew Center 11.09ft in 3.38m

08 Dimensions Dimensions

Transport Length 10.85ft in 3307mm
Transport Width 4.7ft in 1430mm
Transport Height 7.39ft in 2252mm
Wheelbase 3.52ft in 1070mm
Ground Clearance 0.6ft in 180mm
Rear Departure Angle 23
Height To Top Of Suspended Cab 7.39ft in 2252mm
Approach Angle 52- 52degrees

09 Loader Dimensions

Clearance At Max Dump Height 6.88ft in 2097mm
Reach At Max Dump Height 0.99ft in 300mm
Dig Depth 1.97in 50mm
Load Over Height 8.24ft in 2.51m
Dump Height 6.89ft in 2.1m
Bucket Width 56.3in 1430mm
Loader Hinge Pin Height_Short Arms 8.9ft in 2.71m
Rollback - Ground Level 35degrees

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.