Specification sheet Backhoe Loader Ref international-3820-loader-backhoe
International 3820
The International 3820 is a backhoe loader with an operating weight of 15,000.26 lb (6,804 kg), a 101 hp engine, and a dig depth of 16.25 ft (4,950 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
15,000.26lb
6,804kg
Engine power
101hp
75.4kW
Gross Power Dig depth
16.25ft
4,950mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the International 3820 sits at the heavy end of its class:
- Engine power 101 hp more powerful than 90% (n=282)
- Dig depth 16.3 ft deeper-digging than 83% (n=256)
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | International Harvester | |
| Gross Power | 101hp | 75.4kw |
| Displacement | 311.3cu in | 5.1L |
| Bore | 3.9in | 98mm |
| Stroke | 4.4in | 111mm |
02 Operational Specification
| Max Weight | 15000.3lb | 6804kg |
|---|---|---|
| Tire Size Front - 2wd / 4wd | 14.0-24 | |
| Rear Tires Size 2wd/4wd | 14.0-24 |
03 Hydraulic Specification
| Pump Flow Capacity | 34gal/min | 128.8L/min |
|---|
04 Backhoe Dimensions
| Dig Depth - Std | 16.25ft in | 4950mm |
|---|
05 Loader Dimensions
| Lift Capacity At Full Height | 5000.09lb | 2268kg |
|---|
?Questions & answersfrom this machine's data
- What engine does a International 3820 backhoe loader have?
- A International 3820 backhoe loader is powered by a International Harvester engine producing 101 hp (75.4 kW).
- How deep can a International 3820 backhoe loader dig?
- A International 3820 backhoe loader has a maximum dig depth of 16.3 ft (4,950 mm).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.