Specification sheet Backhoe Loader Ref ingersoll-rand-bl570-loader-backhoe

Ingersoll Rand BL570

The Ingersoll Rand BL570 is a backhoe loader with a 56 hp engine, a 0.66 yd³ (0.5 m³) bucket, and a dig depth of 10.41 ft (3,172 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Engine power
56hp
41.8kW
Gross Power
Bucket capacity
0.66yd³
0.5m³
Dig depth
10.41ft
3,172mm

Where it sits in its classpercentile · backhoe loaders

Among 294 backhoe loaders , the Ingersoll Rand BL570 sits below the median for its class:

  • Engine power 56 hp less powerful than 84% (n=282)
  • Dig depth 10.4 ft shallower-digging than 88% (n=256)

Scale drawingdrawn to scale · mm

2480B6122A
Side elevation
2480B1870C
Front elevation

Envelope assembled from published extents that may reflect different machine configurations (e.g. transport length with operating height).

01 Engine Specification

Gross Power 56hp 41.8kw

02 Operational Specification

Operating Weight 4wd 9953.9lb 4515kg
Fuel Capacity 25.1gal 95L
Turning Radius 15.5ft in 4700mm

03 Transmission Specification

Transmission Type Hydrostatic
Number Of Forward Gears 2
Number Of Reverse Gears 2
Max Speed - Forward 11.5mph 18.5km/h

04 Backhoe Dimensions

Load Height - Std 10.4ft in 3169mm
Reach From Swivel - Std 15.15ft in 4616mm
Dig Depth - Std 10.41ft in 3172mm
Bucket Dig Force - Std 19191.25lb 8705kg
Dig Depth - Ext 11.81ft in 3598mm

05 Dimensions Dimensions

Transport Length 20.09ft in 6122mm
Transport Width 6.14ft in 1870mm
Wheelbase 6.3ft in 1920mm
Height To Top Of Suspended Cab 8.14ft in 2480mm

06 Loader Dimensions

Clearance At Max Dump Height 7.64ft in 2326mm
Reach At Max Dump Height 1.3ft in 395mm
Dig Depth 2.17in 55mm
Lift Capacity At Full Height 3406.15lb 1545kg
Bucket Breakout Force 2106459.82lb 9370kN
Bucket Width 73.63in 1870mm
Bucket Capacity 0.66yd3 0.5m3

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.