Specification sheet Backhoe Loader Ref ingersoll-rand-bl370-loader-backhoe

Ingersoll Rand BL370

The Ingersoll Rand BL370 is a backhoe loader with a 46 hp engine, a 0.66 yd³ (0.5 m³) bucket, and a dig depth of 11.05 ft (3,368 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Engine power
46hp
34.4kW
Gross Power
Bucket capacity
0.66yd³
0.5m³
Dig depth
11.05ft
3,368mm

◆Where it sits in its classpercentile · backhoe loaders

Among 294 backhoe loaders , the Ingersoll Rand BL370 sits at the compact end of its class:

  • Engine power 46 hp less powerful than 90% (n=282)
  • Dig depth 11.1 ft shallower-digging than 87% (n=256)

◇Scale drawingdrawn to scale · mm

2326B5880A
Side elevation
2326B1873C
Front elevation

Envelope assembled from published extents that may reflect different machine configurations (e.g. transport length with operating height).

01 Engine Specification

Gross Power 46hp 34.4kw

02 Operational Specification

Fuel Capacity 25.1gal 95L
Operating Weight 4wd 9259.5lb 4200kg
Turning Radius 14.7ft in 4471mm
Tire Size Front - 2wd / 4wd 12x16.5

03 Transmission Specification

Transmission Type Hydrostatic
Number Of Forward Gears 2
Number Of Reverse Gears 2
Max Speed - Forward 10.9mph 17.5km/h

04 Backhoe Dimensions

Load Height - Std 9.18ft in 2796mm
Reach From Swivel - Std 13.9ft in 4236mm
Dig Depth - Std 11.05ft in 3368mm
Bucket Dig Force - Std 15037.74lb 6821kg

05 Dimensions Dimensions

Transport Length 19.3ft in 5880mm
Transport Width 6.15ft in 1873mm
Wheelbase 5.97ft in 1819mm
Height To Top Of Suspended Cab 7.64ft in 2326mm

06 Loader Dimensions

Clearance At Max Dump Height 6.71ft in 2043mm
Reach At Max Dump Height 1.37ft in 416mm
Dig Depth 2.76in 70mm
Bucket Breakout Force 1895139.41lb 8430kN
Bucket Width 73.75in 1873mm
Bucket Capacity 0.66yd3 0.5m3

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.