Specification sheet Backhoe Loader Ref ingersoll-rand-bl275-loader-backhoe

Ingersoll Rand BL275

The Ingersoll Rand BL275 is a backhoe loader with a 31.5 hp engine, a 0.49 yd³ (0.37 m³) bucket, and a dig depth of 10.57 ft (3,220 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Engine power
31.5hp
23.5kW
Gross Power
Bucket capacity
0.49yd³
0.37m³
Dig depth
10.57ft
3,220mm

◆Where it sits in its classpercentile · backhoe loaders

Among 294 backhoe loaders , the Ingersoll Rand BL275 sits at the compact end of its class:

  • Engine power 32 hp less powerful than 96% (n=282)
  • Dig depth 10.6 ft shallower-digging than 88% (n=256)

◇Scale drawingdrawn to scale · mm

2364B4623A
Side elevation
2364B1600C
Front elevation

Envelope assembled from published extents that may reflect different machine configurations (e.g. transport length with operating height).

01 Engine Specification

Gross Power 31.5hp 23.5kw

02 Operational Specification

Fuel Capacity 14.6gal 55L
Operating Weight 4wd 6770.4lb 3071kg
Turning Radius 11.9ft in 3607mm
Tire Size Front - 2wd / 4wd 10x16.5

03 Transmission Specification

Transmission Type Hydrostatic

04 Backhoe Dimensions

Load Height - Std 7.9ft in 2407mm
Reach From Swivel - Std 12.72ft in 3875mm
Dig Depth - Std 10.57ft in 3220mm
Bucket Dig Force - Std 11772.69lb 5340kg

05 Dimensions Dimensions

Transport Length 15.17ft in 4623mm
Transport Width 5.25ft in 1600mm
Wheelbase 5.55ft in 1690mm
Height To Top Of Suspended Cab 7.76ft in 2364mm

06 Loader Dimensions

Clearance At Max Dump Height 6.2ft in 1887mm
Reach At Max Dump Height 3.11ft in 947mm
Dig Depth 5.24in 133mm
Lift Capacity At Full Height 2270.77lb 1030kg
Bucket Breakout Force 955438.02lb 4250kN
Bucket Width 63in 1600mm
Bucket Capacity 0.49yd3 0.37m3

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.