Specification sheet Wheel Loader Ref dressta-560e-wheel-loader
Dressta 560E
The Dressta 560E is a wheel loader with an operating weight of 92,549 lb (41,980 kg), a 427 hp engine, and a 7.5 yd³ (5.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
92,549lb
41,980kg
Engine power
427hp
319kW
Net Power Bucket capacity
7.5yd³
5.7m³
◆Where it sits in its classpercentile · large wheel loaders
Among 39 large wheel loaders (90,000–150,000 lb), the Dressta 560E sits at the compact end of its class:
- Operating weight 92,550 lb lighter than 92% (n=39)
- Engine power 427 hp less powerful than 54% (n=37)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | QSX15 | |
| Net Power | 427hp | 319kw |
| Gross Power | 450hp | 336kw |
| Power Measured @ | 1400rpm | |
| Max Torque | 1550lb ft | 2102Nm |
| Displacement | 912cu in | 15L |
| Torque Measured @ | 2000rpm | |
| Aspiration | Turbocharged and CAC |
02 Operational Specification
| Operating Weight | 92549lb | 41980kg |
|---|---|---|
| Fuel Capacity | 185gal | 700L |
| Hydraulic System Fluid Capacity | 54gal | 206L |
| Engine Oil Fluid Capacity | 13gal | 49L |
| Cooling System Fluid Capacity | 21.7gal | 82L |
| Transmission Fluid Capacity | 38gal | 144L |
| Static Tipping Weight | 72029lb | 32672kg |
| Turning Radius | 28.4ft in | 8635mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 80amps | |
| Rear Axle Oscillation | 23degrees | |
| Tire Size | 29.5x29,34PR(L-3) |
03 Transmission Specification
| Transmission Type | Electrically controlled, full soft shift transmission, driven by a double universal joint from the torque converter | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 20.2mph | 32.5km/h |
| Max Speed - Reverse | 20.2mph | 32.5km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 1000psi | 6894.8kPa |
|---|---|---|
| Pump Flow Capacity | 140gal/min | 530L/min |
| Raise Time | 9.1sec | |
| Dump Time | 2.8sec | |
| Lower Time | 5.6sec | |
| Pump Type | Gear, driven from torque converter |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 11.42ft in | 3480.82mm |
|---|---|---|
| Breakout Force | 71419lb | 317.7kN |
| Bucket Capacity - Heaped | 7.5yd3 | 5.7m3 |
| Bucket Capacity - Struck | 6.1yd3 | 4.7m3 |
| Bucket Width | 11.98ft in | 3650mm |
06 Dimensions Dimensions
| Ground Clearance | 1.65ft in | 500mm |
|---|---|---|
| Length With Bucket On Ground | 32.25ft in | 9829.8mm |
| Width Over Tires | 8.5ft in | 2590.8mm |
| Height To Top Of Cab | 13.5ft in | 4114.8mm |
| Hinge Pin - Max Height | 16.58ft in | 5053.59mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.