Specification sheet Wheel Loader Ref doosan-dl500-wheel-loader

Doosan DL500

The Doosan DL500 is a wheel loader with a 335 hp engine, and a 6.28 yd³ (4.8 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Engine power
335hp
249.9kW
Net Power
Bucket capacity
6.28yd³
4.8m³

Where it sits in its classnot positioned

This machine has no published operating weight, so it cannot be placed in a wheel-loader weight band.

Scale drawingdrawn to scale · mm

3820B510C9525A
Side elevation
3820B3400D
Front elevation

01 Engine Specification

Number Of Cylinders 6
Engine Make 2347
Engine Model QSM11
Net Power 335hp 249.9kw
Gross Power 360hp 268.5kw
Power Measured @ 1900rpm
Max Torque 1236.9lb ft 1677Nm
Displacement 659cu in 10.8L
Torque Measured @ 1400rpm
Aspiration turbocharged air to air intercooler

02 Operational Specification

Fuel Capacity 125.8gal 476L
Hydraulic System Fluid Capacity 62.4gal 236L
Engine Oil Fluid Capacity 9gal 34L
Cooling System Fluid Capacity 15.9gal 60L
Transmission Fluid Capacity 14.3gal 54L
Front Axle/Diff Fluid Capacity 13.3gal 50L
Rear Axle/Diff Fluid Capacity 13.3gal 50L
Static Tipping Weight 50706lb 22999.9kg
Turning Radius 24.2ft in 7370mm
Operating Voltage 24V
Alternator Supplied Amperage 70amps
Rear Axle Oscillation 20degrees
Tire Size 29.5R25

03 Transmission Specification

Transmission Type full power shift
Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed - Forward 21.8mph 35km/h
Max Speed - Reverse 15.2mph 24.4km/h

04 Hydraulic System Specification

Relief Valve Setting 3626psi 25000kPa
Pump Flow Capacity 122.6gal/min 464L/min
Raise Time 6sec
Dump Time 1.8sec
Lower Time 4.3sec
Pump Type axial piston

05 Bucket Dimensions

Dump Clearance At Max Raise 11.02ft in 3356mm
Bucket Capacity - Heaped 6.28yd3 4.8m3
Bucket Width 11.16ft in 3400mm
Breakout Force 61373lb 273kN

06 Dimensions Dimensions

Ground Clearance 1.68ft in 510mm
Length With Bucket On Ground 31.25ft in 9525mm
Width Over Tires 11.16ft in 3400mm
Height To Top Of Cab 12.54ft in 3820mm
Wheelbase 11.82ft in 3600mm
Hinge Pin - Max Height 15.04ft in 4584mm
Reach At Max Lift And Dump 10.24ft in 3120mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.