Specification sheet Wheel Loader Ref doosan-dl400-wheel-loader
Doosan DL400
The Doosan DL400 is a wheel loader with a 280 hp engine, and a 5.11 yd³ (3.9 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
280hp
208.8kW
Net Power Bucket capacity
5.11yd³
3.9m³
◆Where it sits in its classnot positioned
This machine has no published operating weight, so it cannot be placed in a wheel-loader weight band.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | QSL 9 | |
| Net Power | 280hp | 208.8kw |
| Gross Power | 310hp | 231.2kw |
| Power Measured @ | 2000rpm | |
| Max Torque | 1070.3lb ft | 1451Nm |
| Displacement | 543cu in | 8.9L |
| Torque Measured @ | 1400rpm | |
| Aspiration | turbo charged air to air intercooler |
02 Operational Specification
| Fuel Capacity | 96.5gal | 365L |
|---|---|---|
| Hydraulic System Fluid Capacity | 70.1gal | 265L |
| Engine Oil Fluid Capacity | 6.7gal | 25L |
| Cooling System Fluid Capacity | 13.3gal | 50L |
| Transmission Fluid Capacity | 14.3gal | 54L |
| Front Axle/Diff Fluid Capacity | 11.9gal | 45L |
| Rear Axle/Diff Fluid Capacity | 11.1gal | 42L |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 26.5-25-20PR-L3 |
03 Transmission Specification
| Transmission Type | full power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.7mph | 38km/h |
| Max Speed - Reverse | 17.4mph | 28km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3626psi | 25000kPa |
|---|---|---|
| Pump Flow Capacity | 100.4gal/min | 380L/min |
| Raise Time | 6sec | |
| Dump Time | 1.4sec | |
| Lower Time | 3sec | |
| Pump Type | axial piston pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.77ft in | 2975mm |
|---|---|---|
| Bucket Capacity - Heaped | 5.11yd3 | 3.9m3 |
| Bucket Width | 10.5ft in | 3200mm |
| Breakout Force | 49458lb | 49458- |
06 Dimensions Dimensions
| Ground Clearance | 1.68ft in | 510mm |
|---|---|---|
| Length With Bucket On Ground | 28.58ft in | 8710mm |
| Width Over Tires | 9.8ft in | 2985mm |
| Height To Top Of Cab | 11.56ft in | 3522mm |
| Wheelbase | 11.49ft in | 3500mm |
| Hinge Pin - Max Height | 14.28ft in | 4350mm |
| Reach At Max Lift And Dump | 9.77ft in | 2975mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.