Specification sheet Backhoe Loader Ref dingo-k9-4-yanmar-loader-backhoe
Dingo K9-4 Yanmar
The Dingo K9-4 Yanmar is a backhoe loader with a 27 hp engine, a 0.2 yd³ (0.15 m³) bucket, and a dig depth of 7.22 ft (2,200 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
27hp
20.1kW
Gross Power Bucket capacity
0.2yd³
0.15m³
Dig depth
7.22ft
2,200mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Dingo K9-4 Yanmar sits at the compact end of its class:
- Engine power 27 hp less powerful than 96% (n=282)
- Dig depth 7.2 ft shallower-digging than 100% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Make | 2348 | |
| Gross Power | 27hp | 20.1kw |
| Power Measured @ | 3200rpm | |
| Displacement | 67.2cu in | 1.1L |
02 Operational Specification
| Operating Weight 2wd | 2149.6lb | 975kg |
|---|---|---|
| Turning Radius | 8.7ft in | 2650mm |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 4.6mph | 7.4km/h |
| Max Speed Reverse | 4.6mph | 7.4km/h |
04 Hydraulic Specification
| Pump Type | Gear | |
|---|---|---|
| Pump Flow Capacity | 12.5gal/min | 47L/min |
| Relief Valve Pressure | 3408psi | 23497.4kPa |
05 Backhoe Dimensions
| Load Height - Std | 3.94ft in | 1200mm |
|---|---|---|
| Reach From Swivel - Std | 10.5ft in | 3200mm |
| Dig Depth - Std | 7.22ft in | 2200mm |
06 Dimensions Dimensions
| Transport Length | 9.85ft in | 3000mm |
|---|---|---|
| Transport Width | 3.45ft in | 1050mm |
| Transport Height | 4.93ft in | 1500mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 6.03ft in | 1835mm |
|---|---|---|
| Bucket Width | 41.34in | 1050mm |
| Bucket Capacity | 0.2yd3 | 0.15m3 |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.