Specification sheet Wheel Loader Ref daewoo-mega-300-iii-wheel-loader

Daewoo MEGA 300 III

The Daewoo MEGA 300 III is a wheel loader with a 205 hp engine.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Engine power
205hp
152.87kW
Gross Power

Where it sits in its classnot positioned

This machine has no published operating weight, so it cannot be placed in a wheel-loader weight band.

01 Engine Specification

Number Of Cylinders 6
Engine Make Daewoo
Engine Model D2366T
Gross Power 205hp 152.9kw
Power Measured @ 2200rpm
Displacement 674.1cu in 11.1L
Bore 4.9in 123mm
Stroke 6.2in 155mm

02 Operational Specification

Fuel Capacity 79.3gal 300L
Hydraulic System Fluid Capacity 52.9gal 200L
Engine Oil Fluid Capacity 6.7gal 25L
Cooling System Fluid Capacity 13.3gal 50L
Transmission Fluid Capacity 7.4gal 28L
Front Axle/Diff Fluid Capacity 15.1gal 57L
Rear Axle/Diff Fluid Capacity 11.1gal 42L
Operating Voltage 24V
Alternator Supplied Amperage 50amps
Rear Axle Oscillation 30degrees
Tire Size 23.5 - 25 - 16PR(L-3)

03 Transmission Specification

Transmission Type Full power-shift
Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed - Forward 23.7mph 38.2km/h
Max Speed - Reverse 24mph 38.7km/h

04 Hydraulic System Specification

Pump Flow Capacity 86.7gal/min 328L/min
Raise Time 5.6sec
Dump Time 1.3sec
Lower Time 3.5sec
Total Cycle 10.4sec
Pump Type Triple tandem vane pump

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.