Specification sheet Wheel Loader Ref daewoo-mega-200-iii-wheel-loader

Daewoo MEGA 200-III

The Daewoo MEGA 200-III is a wheel loader with a 126 hp engine.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Engine power
126hp
93.96kW
Gross Power

Where it sits in its classnot positioned

This machine has no published operating weight, so it cannot be placed in a wheel-loader weight band.

01 Engine Specification

Number Of Cylinders 6
Engine Make Daewoo
Engine Model DB58T
Gross Power 126hp 94kw
Power Measured @ 2200rpm
Displacement 353.1cu in 5.8L
Bore 4.1in 102mm
Stroke 4.7in 118mm

02 Operational Specification

Fuel Capacity 66.1gal 250L
Hydraulic System Fluid Capacity 34.4gal 130L
Engine Oil Fluid Capacity 5.6gal 21L
Cooling System Fluid Capacity 13.3gal 50L
Transmission Fluid Capacity 8gal 30L
Front Axle/Diff Fluid Capacity 5.1gal 19.2L
Rear Axle/Diff Fluid Capacity 4.9gal 18.4L
Operating Voltage 24V
Alternator Supplied Amperage 50amps
Rear Axle Oscillation 26degrees
Tire Size 17.5 - 25 - 12PR(L-2)

03 Transmission Specification

Transmission Type Full power-shift
Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed - Forward 22.3mph 35.9km/h
Max Speed - Reverse 14.2mph 22.9km/h

04 Hydraulic System Specification

Pump Flow Capacity 53.1gal/min 201L/min
Raise Time 5.2sec
Dump Time 1.3sec
Lower Time 3.3sec
Total Cycle 9.8sec
Pump Type Triple tandem vane pump

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.