Specification sheet Wheel Loader Ref caterpillar-r2900g-xtra-wheel-loader

Caterpillar R2900G XTRA

The Caterpillar R2900G XTRA is a wheel loader with an operating weight of 123,459 lb (56,000 kg), a 378 hp engine, and a 11.7 yd³ (8.9 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
123,459lb
56,000kg
Engine power
378hp
281.9kW
Net Power
Bucket capacity
11.7yd³
8.9m³

Where it sits in its classpercentile · large wheel loaders

Among 39 large wheel loaders (90,000–150,000 lb), the Caterpillar R2900G XTRA sits above the median for its class:

  • Operating weight 123,460 lb heavier than 85% (n=39)
  • Engine power 378 hp less powerful than 81% (n=37)

Scale drawingdrawn to scale · mm

2988B467C11083A
Side elevation
2988B3454D
Front elevation

01 Engine Specification

Engine Make 2236
Engine Model 3406E EUI ATAAC
Net Power 378hp 281.9kw
Gross Power 410hp 305.8kw
Power Measured @ 2100rpm
Displacement 893.9cu in 14.6L

02 Operational Specification

Operating Weight 123459lb 56000kg
Fuel Capacity 225.6gal 854L
Hydraulic System Fluid Capacity 37gal 140.1L
Engine Oil Fluid Capacity 9gal 34.1L
Cooling System Fluid Capacity 19.8gal 75L
Transmission Fluid Capacity 16.4gal 62.1L
Front Axle/Diff Fluid Capacity 31.4gal 118.9L
Rear Axle/Diff Fluid Capacity 33.5gal 126.9L
Static Tipping Weight 100940lb 45782kg
Turning Radius — value corrected — the source published it under the wrong unit 24.64ft in 7511mm
Tire Size 36/65R33 VSDL Radials

03 Transmission Specification

Number Of Forward Gears 4
Number Of Reverse Gears 4
Max Speed - Forward 15mph 24.2km/h
Max Speed - Reverse 16.8mph 27km/h

04 Hydraulic System Specification

Raise Time 7.6sec
Dump Time 2.8sec
Lower Time 2.4sec

05 Bucket Dimensions

Dump Clearance At Max Raise 20.46ft in 6235mm
Bucket Capacity - Heaped 11.7yd3 8.9m3
Bucket Width 11.34ft in 3454mm
Breakout Force 55340lb 55340-

06 Dimensions Dimensions

Ground Clearance 1.54ft in 467.36mm
Length With Bucket On Ground 36.37ft in 11083mm
Width Over Tires 11.34ft in 3454mm
Height To Top Of Cab 9.81ft in 2988mm
Wheelbase 12.41ft in 3780mm
Hinge Pin - Max Height 14.9ft in 4541mm

Data notes

Corrected value. The source published this figure under the wrong unit. The metric figure is authoritative and the imperial value shown here is derived from it.

  • Turning Radius: shown as 24.64 ft in (source stated a value inconsistent with its own metric figure of 7511 mm)

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.