Specification sheet Wheel Loader Ref caterpillar-992d-wheel-loader
Caterpillar 992D
The Caterpillar 992D is a wheel loader with an operating weight of 196,559.74 lb (89,158 kg), a 690 hp engine, and a 14 yd³ (10.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
196,559.74lb
89,158kg
Engine power
690hp
514.6kW
Net Power Bucket capacity
14yd³
10.7m³
◆Where it sits in its classpercentile · very large wheel loaders
Among 45 very large wheel loaders (>150,000 lb), the Caterpillar 992D sits below the median for its class:
- Operating weight 196,560 lb lighter than 67% (n=45)
- Engine power 690 hp less powerful than 71% (n=41)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2236 | |
|---|---|---|
| Engine Model | 3412 | |
| Net Power | 690hp | 514.6kw |
| Gross Power | 735hp | 548.1kw |
| Power Measured @ | 2200rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 196559.8lb | 89158kg |
|---|---|---|
| Fuel Capacity | 300.1gal | 1136L |
| Hydraulic System Fluid Capacity | 143gal | 541L |
| Engine Oil Fluid Capacity | 18.8gal | 71L |
| Cooling System Fluid Capacity | 36gal | 136L |
| Transmission Fluid Capacity | 34.9gal | 132L |
| Front Axle/Diff Fluid Capacity | 79.3gal | 300L |
| Rear Axle/Diff Fluid Capacity | 79.3gal | 300L |
| Static Tipping Weight | 113527.1lb | 51495kg |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 75amps | |
| Rear Axle Oscillation | 22degrees | |
| Tire Size | 45/65-45, 38PR L5 |
03 Transmission Specification
| Transmission Type | planetary electric shift, power shift | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 13.1mph | 21km/h |
| Max Speed - Reverse | 14.3mph | 22.9km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3250psi | 22408kPa |
|---|---|---|
| Pump Flow Capacity | 474gal/min | 1794L/min |
| Raise Time | 11.4sec | |
| Dump Time | 3.4sec | |
| Lower Time | 3.7sec | |
| Pump Type | closed with pressure control |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 13.66ft in | 4161.5mm |
|---|---|---|
| Bucket Capacity - Heaped | 14yd3 | 10.7m3 |
| Bucket Capacity - Struck | 11.7yd3 | 8.94m3 |
| Bucket Width | 15.59ft in | 4750mm |
| Breakout Force | 146711lb | 652.61kN |
06 Dimensions Dimensions
| Length With Bucket On Ground | 43.13ft in | 13145.1mm |
|---|---|---|
| Height To Top Of Cab | 18.01ft in | 5487mm |
| Wheelbase | 15.84ft in | 4826mm |
| Hinge Pin - Max Height | 20.55ft in | 6262mm |
| Reach At Max Lift And Dump | 7.57ft in | 2305.9mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.