Specification sheet Wheel Loader Ref caterpillar-992c-wheel-loader
Caterpillar 992C
The Caterpillar 992C is a wheel loader with an operating weight of 187,789.77 lb (85,180 kg), a 690 hp engine, and a 12.56 yd³ (9.6 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
187,789.77lb
85,180kg
Engine power
690hp
514.6kW
Net Power Bucket capacity
12.56yd³
9.6m³
◆Where it sits in its classpercentile · very large wheel loaders
Among 45 very large wheel loaders (>150,000 lb), the Caterpillar 992C sits below the median for its class:
- Operating weight 187,790 lb lighter than 69% (n=45)
- Engine power 690 hp less powerful than 71% (n=41)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Model | 3412 | |
|---|---|---|
| Net Power | 690hp | 514.6kw |
| Displacement | 1647.7cu in | 27L |
02 Operational Specification
| Operating Weight | 187789.8lb | 85180kg |
|---|---|---|
| Fuel Capacity | 300.1gal | 1136L |
| Hydraulic System Fluid Capacity | 143gal | 541L |
| Static Tipping Weight | 106483.3lb | 48300kg |
03 Transmission Specification
| Number Of Forward Gears | 3 | |
|---|---|---|
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 13.2mph | 21.1km/h |
| Max Speed - Reverse | 14.5mph | 23.3km/h |
04 Hydraulic System Specification
| Raise Time | 12sec | |
|---|---|---|
| Dump Time | 2.5sec | |
| Lower Time | 4sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 14.76ft in | 4496mm |
|---|---|---|
| Bucket Capacity - Heaped | 12.56yd3 | 9.6m3 |
| Bucket Capacity - Struck | 10.7yd3 | 8.18m3 |
| Bucket Width | 15.09ft in | 4597mm |
| Breakout Force | 147050lb | 147050- |
06 Dimensions Dimensions
| Length With Bucket On Ground | 41.74ft in | 12720mm |
|---|---|---|
| Height To Top Of Cab | 28.68ft in | 8740mm |
| Reach At Max Lift And Dump | 6.84ft in | 2083mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.