Specification sheet Wheel Loader Ref caterpillar-988f-series-ii-wheel-loader
Caterpillar 988F Series II
The Caterpillar 988F Series II is a wheel loader with an operating weight of 100,702.76 lb (45,678 kg), a 675 hp engine, and a 6.6 yd³ (5.04 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
100,702.76lb
45,678kg
Engine power
675hp
503.35kW
Gross Power Bucket capacity
6.6yd³
5.04m³
◆Where it sits in its classpercentile · large wheel loaders
Among 39 large wheel loaders (90,000–150,000 lb), the Caterpillar 988F Series II sits below the median for its class:
- Operating weight 100,700 lb lighter than 64% (n=39)
- Engine power 675 hp more powerful than 97% (n=37)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2236 | |
|---|---|---|
| Engine Model | 3408E TA | |
| Gross Power | 675hp | 503.4kw |
| Displacement | 1098.5cu in | 18L |
| Engine Model | Cat 3408E |
02 Operational Specification
| Operating Weight | 100702.8lb | 45678kg |
|---|---|---|
| Fuel Capacity | 174.1gal | 659L |
| Hydraulic System Fluid Capacity | 78gal | 295L |
| Static Tipping Weight | 67889.2lb | 30794kg |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 21.9mph | 35.1km/h |
| Max Speed - Reverse | 14.7mph | 23.5km/h |
04 Buckets Specification
| Maximum Bucket Capacity | 9yd3 | 6.9m3 |
|---|
05 Hydraulic System Specification
| Raise Time | 7.9sec | |
|---|---|---|
| Dump Time | 3.3sec | |
| Lower Time | 4sec |
06 Operating Specifications Specification
| Static Tipping Load - Full Turn | 80432lb | 36483.4kg |
|---|---|---|
| Dump Clearance | 13.9ft in | 4.3m |
| Breakout Force | 129661lb | 58813.3kg |
| Travel Speed | 14mph | 22.6km/h |
07 Service Refill Capacities Specification
| Fuel Tank | 252gal | 954L |
|---|
08 Hydraulic Cycle Times Specification
| Raise | 7.9 s | |
|---|---|---|
| Lower Float Down - Empty | 4 s |
09 Bucket Dimensions
| Dump Clearance At Max Raise | 10.56ft in | 3218mm |
|---|---|---|
| Breakout Force | 82282lb | 366.01kN |
| Bucket Capacity - Heaped | 6.6yd3 | 5.04m3 |
| Bucket Capacity - Struck | 4.06yd3 | 3.1m3 |
| Bucket Width | 12.38ft in | 3772mm |
10 Dimensions Dimensions
| Ground Clearance | 1.63ft in | 496mm |
|---|---|---|
| Length With Bucket On Ground | 35.86ft in | 10928mm |
| Width Over Tires | 11.55ft in | 3520mm |
| Height To Top Of Cab | 13.51ft in | 4115mm |
| Reach At Max Lift And Dump | 5.29ft in | 1611mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.