Specification sheet Backhoe Loader Ref caterpillar-446-loader-backhoe
Caterpillar 446
The Caterpillar 446 is a backhoe loader with a 95 hp engine, a 1.44 yd³ (1.11 m³) bucket, and a dig depth of 17.13 ft (5,219 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
95hp
70.85kW
Net Power Bucket capacity
1.44yd³
1.11m³
Dig depth
17.13ft
5,219mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Caterpillar 446 sits above the median for its class:
- Engine power 95 hp more powerful than 72% (n=282)
- Dig depth 17.1 ft deeper-digging than 92% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2236 | |
| Engine Model | 3114 | |
| Gross Power | 103hp | 76.9kw |
| Net Power | 95hp | 70.9kw |
| Power Measured @ | 2200rpm | |
| Aspiration | turbocharged | |
| Displacement | 268.6cu in | 4.4L |
02 Operational Specification
| Operating Weight 2wd | 19603.6lb | 8892kg |
|---|---|---|
| Fuel Capacity | 33.1gal | 125L |
| Operating Weight 4wd | 20035.7lb | 9088kg |
| Hydraulic System Fluid Capacity | 40.7gal | 154L |
| Oil System Fluid Capacity | 3gal | 11L |
| Cooling System Fluid Capacity | 8gal | 30L |
| Transmission Fluid Capacity | 6.9gal | 26L |
| Front Axle Fluid Capacity | 2.5gal | 9.3L |
| Rear Axle Fluid Capacity | 8.2gal | 31L |
| Turning Radius | 13.8ft in | 4205mm |
| Tire Size Front - 2wd / 4wd | 14.5/75-16.1 10PR / 12.5-20 10PR | |
| Rear Tires Size 2wd/4wd | 21L-24 12PR / 21L-24 12PR | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 55amps |
03 Transmission Specification
| Transmission Type | Powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 20.6mph | 33km/h |
| Max Speed Reverse | 22.7mph | 36.5km/h |
04 Hydraulic Specification
| Pump Type | Variable-flow | |
|---|---|---|
| Pump Flow Capacity | 42.8gal/min | 162L/min |
| Relief Valve Pressure | 2900psi | 19994.8kPa |
05 Backhoe Dimensions
| Load Height - Std | 14.15ft in | 4310mm |
|---|---|---|
| Reach From Swivel - Std | 21.67ft in | 6604mm |
| Dig Depth - Std | 17.13ft in | 5219mm |
| Reach At Load Height - Std | 6.66ft in | 2027mm |
| Load Height - Ext | 16.06ft in | 4894mm |
| Bucket Dig Force - Ext | 13523lb | 6133.93kg |
| Bucket Dig Force - Std | 13573lb | 6156.61kg |
| Dig Depth - Ext | 21.42ft in | 6528mm |
| Reach At Load Height - Ext | 10.7ft in | 3261mm |
| Load At Max Lift - Ext | 2270.77lb | 1030kg |
| Load At Max Lift - Std | 4931.75lb | 2237kg |
| Reach From Swivel - Ext | 25.82ft in | 7868mm |
06 Dimensions Dimensions
| Transport Length | 26.1ft in | 7954mm |
|---|---|---|
| Transport Width | 7.98ft in | 2432mm |
| Transport Height | 13.76ft in | 4193mm |
| Wheelbase | 7.33ft in | 2233mm |
| Ground Clearance | 1.09ft in | 332mm |
| Height To Top Of Suspended Cab | 9.4ft in | 2864mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.86ft in | 2699mm |
|---|---|---|
| Reach At Max Dump Height | 2.85ft in | 868mm |
| Dig Depth | 6.38in | 162mm |
| Bucket Breakout Force | 12004.8lb | 53.4kN |
| Bucket Width | 95.75in | 2432mm |
| Bucket Capacity | 1.44yd3 | 1.11m3 |
| Lift Capacity At Full Height | 8179.16lb | 3710kg |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.