Specification sheet Backhoe Loader Ref caterpillar-442e-loader-backhoe
Caterpillar 442E
The Caterpillar 442E is a backhoe loader with a 99 hp engine, a 1.31 yd³ (1 m³) bucket, and a dig depth of 17.52 ft (5,340 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
99hp
73.83kW
Net Power Bucket capacity
1.31yd³
1m³
Dig depth
17.52ft
5,340mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Caterpillar 442E sits at the heavy end of its class:
- Engine power 99 hp more powerful than 86% (n=282)
- Dig depth 17.5 ft deeper-digging than 93% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2236 | |
| Engine Model | 3054C | |
| Net Power | 99hp | 73.9kw |
| Gross Power | 102hp | 76.1kw |
| Power Measured @ | 2200rpm | |
| Net Torque Rise | 31% | |
| Displacement | 268.6cu in | 4.4L |
02 Operational Specification
| Fuel Capacity | 38.4gal | 145L |
|---|---|---|
| Operating Weight 4wd | 17504.8lb | 7940kg |
| Hydraulic System Fluid Capacity | 10.1gal | 38L |
| Cooling System Fluid Capacity | 5.9gal | 22L |
| Transmission Fluid Capacity | 5.1gal | 19L |
| Front Axle Fluid Capacity | 3gal | 11L |
| Rear Axle Fluid Capacity | 4.3gal | 16L |
| Turning Radius | 15.1ft in | 4600mm |
03 Transmission Specification
| Transmission Type | Power-Shuttle | |
|---|---|---|
| Number Of Forward Gears | 5 | |
| Number Of Reverse Gears | 5 | |
| Max Speed - Forward | 26.1mph | 42km/h |
| Max Speed Reverse | 25.5mph | 41km/h |
04 Hydraulic Specification
| Pump Type | Variable-Flow, Axial-Piston | |
|---|---|---|
| Pump Flow Capacity | 41.3gal/min | 156L/min |
| Relief Valve Pressure | 249psi | 1716.8kPa |
05 Backhoe Dimensions
| Load Height - Std | 13.33ft in | 4060mm |
|---|---|---|
| Reach From Swivel - Std | 19.76ft in | 6022mm |
| Dig Depth - Std | 17.52ft in | 5340mm |
| Load Height - Ext | 15.18ft in | 4625mm |
| Dig Depth - Ext | 21.46ft in | 6541mm |
06 Dimensions Dimensions
| Transport Length | 19.06ft in | 5809mm |
|---|---|---|
| Transport Width | 7.77ft in | 2368mm |
| Transport Height | 12.85ft in | 3914mm |
| Wheelbase | 7.22ft in | 2200mm |
| Height To Top Of Suspended Cab | 9.4ft in | 2863mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.76ft in | 2668mm |
|---|---|---|
| Dig Depth | 3.59in | 91mm |
| Lift Capacity At Full Height | 7471.47lb | 3389kg |
| Bucket Capacity | 1.31yd3 | 1m3 |
| Bucket Width | 94.73in | 2406mm |
| Bucket Breakout Force | 11465.26lb | 51kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.