Specification sheet Backhoe Loader Ref caterpillar-436c-loader-backhoe

Caterpillar 436C

The Caterpillar 436C is a backhoe loader with a 93 hp engine, a 1.31 yd³ (1.01 m³) bucket, and a dig depth of 16.25 ft (4,953 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Engine power
93hp
69.36kW
Net Power
Bucket capacity
1.31yd³
1.01m³
Dig depth
16.25ft
4,953mm

Where it sits in its classpercentile · backhoe loaders

Among 294 backhoe loaders , the Caterpillar 436C sits above the median for its class:

  • Engine power 93 hp more powerful than 65% (n=282)
  • Dig depth 16.3 ft deeper-digging than 83% (n=256)

01 Engine Specification

Number Of Cylinders 4
Engine Make 2236
Engine Model 3054 DIT
Net Power 93hp 69.4kw
Gross Power 97hp 72.4kw
Power Measured @ 2200rpm
Displacement 243cu in 4L

02 Operational Specification

Operating Weight 2wd 15700lb 7121.5kg
Fuel Capacity 33.9gal 128L
Oil System Fluid Capacity 1.9gal 7.2L
Cooling System Fluid Capacity 3gal 11.4L
Transmission Fluid Capacity 4.1gal 15.6L
Front Axle Fluid Capacity 2gal 7.6L
Turning Radius 35.7ft in 10859mm
Tire Size Front - 2wd / 4wd 11L-16 / 12.5/80-18
Rear Tires Size 2wd/4wd 19.5-24

03 Transmission Specification

Transmission Type Power Shuttle
Number Of Forward Gears 4
Number Of Reverse Gears 4
Max Speed - Forward 20.9mph 33.7km/h
Max Speed Reverse 20.9mph 33.7km/h

04 Hydraulic Specification

Pump Flow Capacity 43.1gal/min 163L/min

05 Backhoe Dimensions

Load Height - Std 12.92ft in 3935mm
Dig Depth - Std 16.25ft in 4953mm
Reach At Load Height - Std 6.29ft in 1917mm
Reach At Load Height - Ext 8.92ft in 2717mm
Load Height - Ext 15.7ft in 4783mm
Dig Depth - Ext 20.35ft in 6202mm

06 Loader Dimensions

Clearance At Max Dump Height 8.76ft in 2670mm
Reach At Max Dump Height 2.47ft in 750mm
Dig Depth 1.7in 43mm
Lift Capacity At Full Height 6610lb 2998.25kg
Bucket Width 94.73in 2406mm
Bucket Capacity 1.31yd3 1.01m3
Bucket Breakout Force 10270lb 45.69kN

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.