Specification sheet Backhoe Loader Ref caterpillar-436-series-ii-loader-backhoe
Caterpillar 436 Series II
The Caterpillar 436 Series II is a backhoe loader with a 77 hp engine, a 1.31 yd³ (1 m³) bucket, and a dig depth of 17.88 ft (5,447 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
77hp
57.42kW
Net Power Bucket capacity
1.31yd³
1m³
Dig depth
17.88ft
5,447mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Caterpillar 436 Series II sits below the median for its class:
- Engine power 77 hp less powerful than 63% (n=282)
- Dig depth 17.9 ft deeper-digging than 96% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2351 | |
|---|---|---|
| Engine Model | 4.236 | |
| Net Power | 77hp | 57.5kw |
| Gross Power | 83hp | 61.9kw |
| Displacement | 235.6cu in | 3.9L |
02 Operational Specification
| Operating Weight 2wd | 15163.4lb | 6878kg |
|---|---|---|
| Turning Radius | 12.9ft in | 3905mm |
| Tire Size Front - 2wd / 4wd | 11-16 12PR/10.5-20 10PR | |
| Rear Tires Size 2wd/4wd | 16.9-28 10PR/16.9-28 10 PR |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 18.5mph | 29.7km/h |
| Max Speed Reverse | 18.6mph | 29.8km/h |
04 Hydraulic Specification
| Pump Flow Capacity | 36.5gal/min | 138L/min |
|---|---|---|
| Relief Valve Pressure | 2700psi | 18615.9kPa |
05 Backhoe Dimensions
| Load Height - Std | 12.45ft in | 3794mm |
|---|---|---|
| Reach From Swivel - Std | 19.85ft in | 6048mm |
| Dig Depth - Std | 17.88ft in | 5447mm |
| Bucket Dig Force - Std | 11003lb | 4990.88kg |
| Bucket Dig Force - Ext | 10823lb | 4909.24kg |
| Reach From Swivel - Ext | 23.36ft in | 7119mm |
| Load At Max Lift - Std | 3483.31lb | 1580kg |
| Load At Max Lift - Ext | 2248.72lb | 1020kg |
| Dig Depth - Ext | 21.37ft in | 6513mm |
| Load Height - Ext | 14.3ft in | 4357mm |
06 Dimensions Dimensions
| Transport Length | 23.28ft in | 7094mm |
|---|---|---|
| Transport Width | 7.43ft in | 2262mm |
| Transport Height | 12.5ft in | 3810mm |
| Wheelbase | 6.89ft in | 2100mm |
| Ground Clearance | 1.16ft in | 352mm |
| Height To Top Of Suspended Cab | 9.12ft in | 2779mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.6ft in | 2621mm |
|---|---|---|
| Reach At Max Dump Height | 2.55ft in | 777mm |
| Dig Depth | 3.27in | 83mm |
| Lift Capacity At Full Height | 5260.23lb | 2386kg |
| Bucket Capacity | 1.31yd3 | 1m3 |
| Bucket Width | 89.06in | 2262mm |
| Bucket Breakout Force | 7890.8lb | 35.1kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.