Specification sheet Backhoe Loader Ref caterpillar-434e-loader-backhoe
Caterpillar 434E
The Caterpillar 434E is a backhoe loader with a 91 hp engine, a 1.51 yd³ (1.15 m³) bucket, and a dig depth of 14.23 ft (4,337 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
91hp
67.86kW
Net Power Bucket capacity
1.51yd³
1.15m³
Dig depth
14.23ft
4,337mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Caterpillar 434E sits above the median for its class:
- Engine power 91 hp more powerful than 62% (n=282)
- Dig depth 14.2 ft shallower-digging than 70% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2236 | |
| Engine Model | 3054C | |
| Net Power | 91hp | 67.9kw |
| Gross Power | 94hp | 70.1kw |
| Power Measured @ | 2200rpm | |
| Net Torque Rise | 37% | |
| Displacement | 268.6cu in | 4.4L |
02 Operational Specification
| Fuel Capacity | 49.5gal | 187L |
|---|---|---|
| Operating Weight 4wd | 18452.7lb | 8370kg |
| Hydraulic System Fluid Capacity | 10.1gal | 38L |
| Cooling System Fluid Capacity | 4.3gal | 15.9L |
| Transmission Fluid Capacity | 5.3gal | 20L |
| Front Axle Fluid Capacity | 3gal | 11L |
| Rear Axle Fluid Capacity | 4.3gal | 16L |
| Turning Radius | 18.2ft in | 5530mm |
03 Transmission Specification
| Transmission Type | Caterpillar Power-Shuttle or optional Autoshift transmission | |
|---|---|---|
| Number Of Forward Gears | 5 | |
| Number Of Reverse Gears | 5 | |
| Max Speed - Forward | 23.7mph | 38km/h |
| Max Speed Reverse | 23mph | 37km/h |
04 Hydraulic Specification
| Pump Type | Variable-Flow, Axial-Piston | |
|---|---|---|
| Pump Flow Capacity | 41.3gal/min | 156L/min |
| Relief Valve Pressure | 249psi | 1716.8kPa |
05 Backhoe Dimensions
| Load Height - Std | 6.17ft in | 1878mm |
|---|---|---|
| Reach From Swivel - Std | 18.5ft in | 5638mm |
| Dig Depth - Std | 14.23ft in | 4337mm |
| Load Height - Ext | 9.45ft in | 2878mm |
| Dig Depth - Ext | 17.83ft in | 5432mm |
06 Dimensions Dimensions
| Transport Length | 20.08ft in | 6120mm |
|---|---|---|
| Transport Width | 7.72ft in | 2352mm |
| Transport Height | 11.89ft in | 3623mm |
| Wheelbase | 7.22ft in | 2200mm |
| Height To Top Of Suspended Cab | 9.19ft in | 2801mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 7.99ft in | 2434mm |
|---|---|---|
| Dig Depth | 9.02in | 229mm |
| Lift Capacity At Full Height | 7696.34lb | 3491kg |
| Bucket Capacity | 1.51yd3 | 1.15m3 |
| Bucket Width | 95.83in | 2434mm |
| Bucket Breakout Force | 12139.69lb | 54kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.