Specification sheet Backhoe Loader Ref caterpillar-432e-loader-backhoe
Caterpillar 432E
The Caterpillar 432E is a backhoe loader with an operating weight of 23,589.47 lb (10,700 kg), a 91 hp engine, a 1.31 yd³ (1 m³) bucket, and a dig depth of 16.17 ft (4,926 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
23,589.47lb
10,700kg
Engine power
91hp
67.86kW
Net Power Bucket capacity
1.31yd³
1m³
Dig depth
16.17ft
4,926mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Caterpillar 432E sits above the median for its class:
- Engine power 91 hp more powerful than 62% (n=282)
- Dig depth 16.2 ft deeper-digging than 82% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2236 | |
| Engine Model | 3054C | |
| Gross Power | 94hp | 70.1kw |
| Net Power | 91hp | 67.9kw |
| Net Torque Rise | 37% | |
| Displacement | 268.6cu in | 4.4L |
02 Operational Specification
| Fuel Capacity | 38.4gal | 145L |
|---|---|---|
| Max Weight | 23589.5lb | 10700kg |
| Hydraulic System Fluid Capacity | 10.1gal | 38L |
| Cooling System Fluid Capacity | 4.3gal | 15.9L |
| Transmission Fluid Capacity | 5.1gal | 19L |
| Front Axle Fluid Capacity | 3gal | 11L |
| Rear Axle Fluid Capacity | 4.3gal | 16L |
| Turning Radius | 17.8ft in | 5400mm |
03 Transmission Specification
| Transmission Type | Caterpillar Power-Shuttle or optional Autoshift transmission | |
|---|---|---|
| Number Of Forward Gears | 5 | |
| Number Of Reverse Gears | 5 | |
| Max Speed - Forward | 25.5mph | 41km/h |
| Max Speed Reverse | 24.9mph | 40km/h |
04 Hydraulic Specification
| Pump Type | Variable-Flow, Axial-Piston | |
|---|---|---|
| Pump Flow Capacity | 41.3gal/min | 156L/min |
| Relief Valve Pressure | 249psi | 1716.8kPa |
05 Backhoe Dimensions
| Load Height - Std | 12.29ft in | 3743mm |
|---|---|---|
| Reach From Swivel - Std | 18.34ft in | 5588mm |
| Dig Depth - Std | 16.17ft in | 4926mm |
| Load Height - Ext | 13.96ft in | 4252mm |
| Dig Depth - Ext | 19.54ft in | 5954mm |
06 Dimensions Dimensions
| Transport Length | 19.07ft in | 5810mm |
|---|---|---|
| Transport Width | 7.72ft in | 2352mm |
| Transport Height | 12.2ft in | 3717mm |
| Wheelbase | 7.22ft in | 2200mm |
| Height To Top Of Suspended Cab | 9.4ft in | 2863mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.76ft in | 2668mm |
|---|---|---|
| Dig Depth | 3.59in | 91mm |
| Lift Capacity At Full Height | 8104.2lb | 3676kg |
| Bucket Width | 94.73in | 2406mm |
| Bucket Capacity | 1.31yd3 | 1m3 |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.