Specification sheet Backhoe Loader Ref caterpillar-430d-it-loader-backhoe
Caterpillar 430D IT
The Caterpillar 430D IT is a backhoe loader with a 94 hp engine, a 1.31 yd³ (1 m³) bucket, and a dig depth of 15.22 ft (4,639 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
94hp
70.1kW
Net Power Bucket capacity
1.31yd³
1m³
Dig depth
15.22ft
4,639mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Caterpillar 430D IT sits above the median for its class:
- Engine power 94 hp more powerful than 66% (n=282)
- Dig depth 15.2 ft deeper-digging than 66% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2236 | |
| Engine Model | 3054T | |
| Net Power | 94hp | 70.1kw |
| Gross Power | 98hp | 73.1kw |
| Power Measured @ | 2200rpm | |
| Displacement | 244.1cu in | 4L |
02 Operational Specification
| Fuel Capacity | 33.9gal | 128L |
|---|---|---|
| Operating Weight 4wd | 16215lb | 7355kg |
| Turning Radius | 17.8ft in | 5400mm |
| Tire Size Front - 2wd / 4wd | 11Lx16,12PR / 12.5/80x18,10PR | |
| Rear Tires Size 2wd/4wd | 12.5/80x18,10PR / 19.5x24,10PR |
03 Transmission Specification
| Transmission Type | power shuttle | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21mph | 33.7km/h |
| Max Speed Reverse | 21mph | 33.7km/h |
04 Hydraulic Specification
| Pump Type | LSPC, closed center | |
|---|---|---|
| Pump Flow Capacity | 43.1gal/min | 163L/min |
| Relief Valve Pressure | 3300.2psi | 22754kPa |
05 Backhoe Dimensions
| Load Height - Std | 12.61ft in | 3841mm |
|---|---|---|
| Reach From Swivel - Std | 23.17ft in | 7062mm |
| Dig Depth - Std | 15.22ft in | 4639mm |
| Reach At Load Height - Std | 5.99ft in | 1823mm |
| Bucket Dig Force - Std | 14732lb | 6682.33kg |
| Bucket Dig Force - Ext | 14602lb | 6623.36kg |
| Reach From Swivel - Ext | 27.54ft in | 8393mm |
| Dig Depth - Ext | 19.95ft in | 6079mm |
| Reach At Load Height - Ext | 10.1ft in | 3076mm |
| Load Height - Ext | 15.03ft in | 4581mm |
06 Dimensions Dimensions
| Transport Length | 24.07ft in | 7334mm |
|---|---|---|
| Transport Width | 7.72ft in | 2352mm |
| Transport Height | 12.37ft in | 3770mm |
| Wheelbase | 6.89ft in | 2100mm |
| Ground Clearance | 0.98ft in | 297mm |
| Height To Top Of Suspended Cab | 9.09ft in | 2770mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.45ft in | 2575mm |
|---|---|---|
| Reach At Max Dump Height | 2.64ft in | 802mm |
| Dig Depth | 5.32in | 135mm |
| Lift Capacity At Full Height | 6389lb | 2898kg |
| Bucket Capacity | 1.31yd3 | 1m3 |
| Bucket Width | 94.73in | 2406mm |
| Bucket Breakout Force | 10273.77lb | 45.7kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.