Specification sheet Backhoe Loader Ref caterpillar-428e-loader-backhoe
Caterpillar 428E
The Caterpillar 428E is a backhoe loader with an operating weight of 22,487.16 lb (10,200 kg), a 91 hp engine, a 1.26 yd³ (0.96 m³) bucket, and a dig depth of 16.25 ft (4,953 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
22,487.16lb
10,200kg
Engine power
91hp
67.86kW
Net Power Bucket capacity
1.26yd³
0.96m³
Dig depth
16.25ft
4,953mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Caterpillar 428E sits above the median for its class:
- Engine power 91 hp more powerful than 62% (n=282)
- Dig depth 16.3 ft deeper-digging than 83% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2236 | |
| Engine Model | 3054C | |
| Gross Power | 94hp | 70.1kw |
| Net Power | 91hp | 67.9kw |
| Power Measured @ | 2200rpm | |
| Net Torque Rise | 35% | |
| Displacement | 268.6cu in | 4.4L |
02 Operational Specification
| Fuel Capacity | 38.4gal | 145L |
|---|---|---|
| Operating Weight 4wd | 16689lb | 7570kg |
| Max Weight | 22487.2lb | 10200kg |
| Hydraulic System Fluid Capacity | 10.1gal | 38L |
| Cooling System Fluid Capacity | 4.3gal | 15.9L |
| Transmission Fluid Capacity | 4.9gal | 18.5L |
| Front Axle Fluid Capacity | 3gal | 11L |
| Rear Axle Fluid Capacity | 4.4gal | 16.5L |
| Turning Radius | 17.8ft in | 5400mm |
03 Transmission Specification
| Transmission Type | Caterpillar Power-Shuttle | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 24.9mph | 40km/h |
| Max Speed Reverse | 24.9mph | 40km/h |
04 Hydraulic Specification
| Pump Type | Variable-Flow, Axial-Piston | |
|---|---|---|
| Pump Flow Capacity | 33.1gal/min | 125L/min |
| Relief Valve Pressure | 227psi | 1565.2kPa |
05 Backhoe Dimensions
| Load Height - Std | 12.29ft in | 3743mm |
|---|---|---|
| Reach From Swivel - Std | 18.34ft in | 5588mm |
| Dig Depth - Std | 16.25ft in | 4953mm |
| Load At Max Lift - Ext | 9374.06lb | 4252kg |
| Dig Depth - Ext | 19.61ft in | 5976mm |
| Load Height - Ext | 13.96ft in | 4252mm |
| Load At Max Lift - Std | 8251.91lb | 3743kg |
06 Dimensions Dimensions
| Transport Length | 19.07ft in | 5810mm |
|---|---|---|
| Transport Width | 7.72ft in | 2352mm |
| Transport Height | 12.2ft in | 3717mm |
| Wheelbase | 7.22ft in | 2200mm |
| Height To Top Of Suspended Cab | 9.4ft in | 2863mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.76ft in | 2668mm |
|---|---|---|
| Dig Depth | 3.59in | 91mm |
| Lift Capacity At Full Height | 7314.94lb | 3318kg |
| Bucket Width | 89.06in | 2262mm |
| Bucket Capacity | 1.26yd3 | 0.96m3 |
| Bucket Breakout Force | 11240.45lb | 50kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.