Specification sheet Backhoe Loader Ref caterpillar-428c-loader-backhoe
Caterpillar 428C
The Caterpillar 428C is a backhoe loader with an operating weight of 21,384.84 lb (9,700 kg), a 78 hp engine, a 1.31 yd³ (1 m³) bucket, and a dig depth of 15.64 ft (4,766 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
21,384.84lb
9,700kg
Engine power
78hp
58.17kW
Net Power Bucket capacity
1.31yd³
1m³
Dig depth
15.64ft
4,766mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Caterpillar 428C sits below the median for its class:
- Engine power 78 hp less powerful than 61% (n=282)
- Dig depth 15.6 ft deeper-digging than 75% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2236 | |
| Engine Model | 3054 | |
| Gross Power | 75hp | 56kw |
| Net Power | 78hp | 58.2kw |
| Power Measured @ | 2200rpm | |
| Net Torque Rise | 15.2% | |
| Aspiration | Natural | |
| Displacement | 244.1cu in | 4L |
02 Operational Specification
| Operating Weight 2wd | 13889.2lb | 6300kg |
|---|---|---|
| Fuel Capacity | 33.9gal | 128L |
| Max Weight | 21384.9lb | 9700kg |
| Hydraulic System Fluid Capacity | 20.9gal | 79L |
| Oil System Fluid Capacity | 2gal | 7.3L |
| Cooling System Fluid Capacity | 5gal | 18.9L |
| Transmission Fluid Capacity | 4gal | 15L |
| Rear Axle Fluid Capacity | 6.4gal | 24L |
| Turning Radius | 26.6ft in | 8100mm |
| Tire Size Front - 2wd / 4wd | 11 x 16 / 10.5 x 20 | |
| Rear Tires Size 2wd/4wd | 16.9 x 28 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 52amps |
03 Transmission Specification
| Transmission Type | Power Shuttle | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 19.8mph | 31.8km/h |
| Max Speed Reverse | 19.8mph | 31.8km/h |
04 Hydraulic Specification
| Pump Type | Piston | |
|---|---|---|
| Pump Flow Capacity | 43.1gal/min | 163L/min |
| Relief Valve Pressure | 3002.3psi | 20700kPa |
05 Backhoe Dimensions
| Load Height - Std | 12.48ft in | 3803mm |
|---|---|---|
| Reach From Swivel - Std | 18.31ft in | 5578mm |
| Dig Depth - Std | 15.64ft in | 4766mm |
| Reach At Load Height - Std | 5.38ft in | 1638mm |
| Reach From Swivel - Ext | 21.74ft in | 6625mm |
| Dig Depth - Ext | 19.17ft in | 5842mm |
| Load Height - Ext | 14.62ft in | 4454mm |
| Reach At Load Height - Ext | 8.47ft in | 2579mm |
06 Dimensions Dimensions
| Transport Length | 18.9ft in | 5760mm |
|---|---|---|
| Transport Width | 7.87ft in | 2396mm |
| Transport Height | 12.28ft in | 3740mm |
| Wheelbase | 6.89ft in | 2100mm |
| Ground Clearance | 1.05ft in | 320mm |
| Height To Top Of Suspended Cab | 9.52ft in | 2900mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.44ft in | 2570mm |
|---|---|---|
| Reach At Max Dump Height | 2.7ft in | 820mm |
| Dig Depth | 5.32in | 135mm |
| Bucket Width | 94.34in | 2396mm |
| Bucket Capacity | 1.31yd3 | 1m3 |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.