Specification sheet Backhoe Loader Ref caterpillar-422e-loader-backhoe
Caterpillar 422E
The Caterpillar 422E is a backhoe loader with an operating weight of 22,487.16 lb (10,200 kg), a 76 hp engine, a 1.31 yd³ (1 m³) bucket, and a dig depth of 16.18 ft (4,929 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
22,487.16lb
10,200kg
Engine power
76hp
56.68kW
Net Power Bucket capacity
1.31yd³
1m³
Dig depth
16.18ft
4,929mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Caterpillar 422E sits below the median for its class:
- Engine power 76 hp less powerful than 64% (n=282)
- Dig depth 16.2 ft deeper-digging than 83% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2236 | |
| Engine Model | 3054C | |
| Net Power | 76hp | 56.7kw |
| Gross Power | 78hp | 58.2kw |
| Power Measured @ | 2200rpm | |
| Torque Measured @ | 1400rpm | |
| Net Torque Rise | 24% | |
| Displacement | 268.6cu in | 4.4L |
02 Operational Specification
| Operating Weight 2wd | 22487.2lb | 10200kg |
|---|---|---|
| Fuel Capacity | 38.4gal | 145L |
| Max Weight | 22487.2lb | 10200kg |
| Hydraulic System Fluid Capacity | 10.1gal | 38L |
| Cooling System Fluid Capacity | 4gal | 15.1L |
| Transmission Fluid Capacity | 4.9gal | 18.5L |
| Front Axle Fluid Capacity | 3gal | 11L |
| Rear Axle Fluid Capacity | 4.3gal | 16L |
| Operating Voltage | 12V |
03 Transmission Specification
| Transmission Type | Power shuttle | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 24.9mph | 40km/h |
| Max Speed Reverse | 24.9mph | 40km/h |
04 Hydraulic Specification
| Pump Type | Variable-Flow, Axial-Piston | |
|---|---|---|
| Pump Flow Capacity | 33.1gal/min | 125L/min |
| Relief Valve Pressure | 227psi | 1565.2kPa |
05 Backhoe Dimensions
| Load Height - Std | 12.48ft in | 3802mm |
|---|---|---|
| Reach From Swivel - Std | 18.24ft in | 5558mm |
| Dig Depth - Std | 16.18ft in | 4929mm |
| Reach At Load Height - Std | 5.32ft in | 1620mm |
| Dig Depth - Ext | 19.55ft in | 5958mm |
| Reach At Load Height - Ext | 8.61ft in | 2623mm |
| Reach From Swivel - Ext | 21.69ft in | 6610mm |
| Load At Max Lift - Std | 5899.58lb | 2676kg |
| Load Height - Ext | 14.15ft in | 4311mm |
| Load At Max Lift - Ext | 5337.4lb | 2421kg |
06 Dimensions Dimensions
| Transport Length | 18.98ft in | 5785mm |
|---|---|---|
| Transport Width | 7.72ft in | 2352mm |
| Transport Height | 12.26ft in | 3736mm |
| Wheelbase | 7.22ft in | 2200mm |
| Height To Top Of Suspended Cab | 9.4ft in | 2863mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.6ft in | 2621mm |
|---|---|---|
| Dig Depth | 3.59in | 91mm |
| Lift Capacity At Full Height | 5899.58lb | 2676kg |
| Bucket Width | 94.73in | 2406mm |
| Bucket Capacity | 1.31yd3 | 1m3 |
| Bucket Breakout Force | 8992.36lb | 40kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.