Specification sheet Backhoe Loader Ref caterpillar-420f-it-loader-backhoe
Caterpillar 420F IT
The Caterpillar 420F IT is a backhoe loader with a 102 hp engine, a 1.26 yd³ (0.96 m³) bucket, and a dig depth of 14.31 ft (4,360 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
102hp
76.07kW
Net Power Bucket capacity
1.26yd³
0.96m³
Dig depth
14.31ft
4,360mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Caterpillar 420F IT sits at the heavy end of its class:
- Engine power 102 hp more powerful than 90% (n=282)
- Dig depth 14.3 ft shallower-digging than 65% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 1400 | |
|---|---|---|
| Engine Make | 2236 | |
| Engine Model | C4.4 ACERT | |
| Gross Power | 102hp | 76.1kw |
| Net Power | 102hp | 76.1kw |
| Power Measured @ | 2200rpm | |
| Net Torque Rise | 46% | |
| Net Max Torque | 323lb ft | 438Nm |
| Displacement | 268.6cu in | 4.4L |
02 Operational Specification
| Operating Weight 2wd | 15395lb | 6983.1kg |
|---|---|---|
| Fuel Capacity | 44gal | 166.6L |
| Operating Weight 4wd | 24251lb | 11000.1kg |
| Hydraulic System Fluid Capacity | 25.1gal | 95L |
| Oil System Fluid Capacity | 2.3gal | 8.8L |
| Cooling System Fluid Capacity | 5.9gal | 22L |
| Transmission Fluid Capacity | 4.9gal | 18.5L |
| Front Axle Fluid Capacity | 3gal | 11L |
| Rear Axle Fluid Capacity | 4.4gal | 16.5L |
03 Hydraulic Specification
| Pump Type | Variable Flow, Axial Piston | |
|---|---|---|
| Pump Flow Capacity | 43.1gal/min | 163L/min |
04 Backhoe Dimensions
| Dig Depth - Std | 14.31ft in | 4360mm |
|---|---|---|
| Dig Depth - Ext | 17.86ft in | 5441mm |
05 Dimensions Dimensions
| Transport Length | 23.79ft in | 7250mm |
|---|---|---|
| Transport Width | 7.62ft in | 2322mm |
| Transport Height | 9.25ft in | 2819mm |
| Wheelbase | 7.22ft in | 2200mm |
| Height To Top Of Suspended Cab | 9.25ft in | 2819mm |
06 Loader Dimensions
| Reach At Max Dump Height | 2.66ft in | 808mm |
|---|---|---|
| Dig Depth | 3.27in | 83mm |
| Lift Capacity At Full Height | 7237.78lb | 3283kg |
| Bucket Breakout Force | 11197lb | 49.81kN |
| Bucket Width | 89.06in | 2262mm |
| Bucket Capacity | 1.26yd3 | 0.96m3 |
?Questions & answersfrom this machine's data
- What engine does a Caterpillar 420F IT backhoe loader have?
- A Caterpillar 420F IT backhoe loader is powered by a C4.4 ACERT engine producing 102 hp (76.1 kW).
- How deep can a Caterpillar 420F IT backhoe loader dig?
- A Caterpillar 420F IT backhoe loader has a maximum dig depth of 14.3 ft (4,360 mm).
- How much fuel does a Caterpillar 420F IT backhoe loader hold?
- A Caterpillar 420F IT backhoe loader has a fuel capacity of 44 gal (166.6 L).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.