Specification sheet Backhoe Loader Ref caterpillar-420d-it-loader-backhoe
Caterpillar 420D IT
The Caterpillar 420D IT is a backhoe loader with a 85 hp engine, a 1.26 yd³ (0.96 m³) bucket, and a dig depth of 14.41 ft (4,390 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
85hp
63.39kW
Net Power Bucket capacity
1.26yd³
0.96m³
Dig depth
14.41ft
4,390mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Caterpillar 420D IT sits in the middle of its class:
- Engine power 85 hp less powerful than 52% (n=282)
- Dig depth 14.4 ft shallower-digging than 60% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2236 | |
| Engine Model | 3054T | |
| Net Power | 85hp | 63.4kw |
| Gross Power | 88hp | 65.7kw |
| Power Measured @ | 2200rpm | |
| Displacement | 244.1cu in | 4L |
02 Operational Specification
| Fuel Capacity | 33.9gal | 128L |
|---|---|---|
| Operating Weight 4wd | 15763.1lb | 7150kg |
| Turning Radius | 17.6ft in | 5350mm |
| Tire Size Front - 2wd / 4wd | 11Lx16,12PR/12.5 / 80x18,10PR | |
| Rear Tires Size 2wd/4wd | 19.5x24,10PR / 19.5L24,10PR |
03 Transmission Specification
| Transmission Type | power shuttle | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 20.4mph | 32.8km/h |
| Max Speed Reverse | 20.4mph | 32.8km/h |
04 Hydraulic Specification
| Pump Type | LSPC, closed center | |
|---|---|---|
| Pump Flow Capacity | 43.1gal/min | 163L/min |
| Relief Valve Pressure | 3300.2psi | 22754kPa |
05 Backhoe Dimensions
| Load Height - Std | 11.86ft in | 3613mm |
|---|---|---|
| Reach From Swivel - Std | 18.54ft in | 5650mm |
| Dig Depth - Std | 14.41ft in | 4390mm |
| Reach At Load Height - Std | 2.83ft in | 862mm |
| Bucket Dig Force - Std | 14712lb | 6673.26kg |
| Bucket Dig Force - Ext | 14586lb | 6616.1kg |
| Reach From Swivel - Ext | 21.9ft in | 6675mm |
| Dig Depth - Ext | 18.08ft in | 5510mm |
| Reach At Load Height - Ext | 2.47ft in | 751mm |
| Load Height - Ext | 13.7ft in | 4175mm |
06 Dimensions Dimensions
| Transport Length | 22.89ft in | 6974mm |
|---|---|---|
| Transport Width | 7.72ft in | 2352mm |
| Transport Height | 11.77ft in | 3585mm |
| Wheelbase | 6.89ft in | 2100mm |
| Ground Clearance | 0.98ft in | 297mm |
| Height To Top Of Suspended Cab | 9.09ft in | 2770mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.35ft in | 2544mm |
|---|---|---|
| Reach At Max Dump Height | 2.74ft in | 835mm |
| Dig Depth | 5.32in | 135mm |
| Lift Capacity At Full Height | 6384.59lb | 2896kg |
| Bucket Capacity | 1.26yd3 | 0.96m3 |
| Bucket Width | 89.06in | 2262mm |
| Bucket Breakout Force | 10138.89lb | 45.1kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.