Specification sheet Backhoe Loader Ref caterpillar-416c-loader-backhoe

Caterpillar 416C

The Caterpillar 416C is a backhoe loader with a 75 hp engine, a 1 yd³ (0.76 m³) bucket, and a dig depth of 14.51 ft (4,420 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Engine power
75hp
55.93kW
Net Power
Bucket capacity
1yd³
0.76m³
Dig depth
14.51ft
4,420mm

Where it sits in its classpercentile · backhoe loaders

Among 294 backhoe loaders , the Caterpillar 416C sits below the median for its class:

  • Engine power 75 hp less powerful than 66% (n=282)
  • Dig depth 14.5 ft shallower-digging than 53% (n=256)

Scale drawingdrawn to scale · mm

3585B297C6980A
Side elevation
3585B2352D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2236
Engine Model 3054 DIT
Net Power 75hp 56kw
Gross Power 78hp 58.2kw
Power Measured @ 2200rpm
Displacement 244.1cu in 4L
Net Power - Sae J1349 75hp 56kw
Gross Power - Sae J1995 78hp 58.2kw
Engine Model - Standard Cat 3054T Diesel Engine
Gross Power - Optional - Sae J1995 84hp 62.7kw

02 Operational Specification

Operating Weight 2wd 13960lb 6332.2kg
Fuel Capacity 33.9gal 128L
Tire Size Front - 2wd / 4wd 11L-16, 12PR, F3
Rear Tires Size 2wd/4wd 16.9-24, 10 PR, R4

03 Transmission Specification

Number Of Forward Gears 4
Number Of Reverse Gears 4
Max Speed - Forward 20.4mph 32.9km/h
Max Speed Reverse 20.4mph 32.9km/h

04 Weights Specification

Operating Weight - Maximum 21389lb 9701.9kg
Operating Weight - Nominal 13892lb 6301.4kg

05 Hydraulic Specification

Pump Flow Capacity 43.1gal/min 163L/min

06 Hydraulic System Specification

Pump Type Variable flow, axial piston
Circuit Type Closed center
System Pressure 3002.28 psi

07 Axle Ratings Specification

Rear Axle - Static 61222.3lb 27770kg
Front Axle (2wd) - Static 30313.6lb 13750kg
Dynamic (1) 6982.1lb 3167kg
Dynamic (2) 20414.8lb 9260kg

08 Service Refill Specification

Fuel Tank 33.9gal 128L
Engine Oil - With Filter 2gal 7.4L
Rear Axle 6.4gal 24L
Front Axle (4wd) 2gal 7.5L
Hydraulic System 20.9gal 79.1L
Hydraulic Tank 10.1gal 38.1L

09 Backhoe Dimensions

Load Height - Std 11.43ft in 3483mm
Dig Depth - Std 14.51ft in 4420mm
Reach At Load Height - Std 5.79ft in 1764mm
Bucket Dig Force - Std 11700lb 5307.04kg
Bucket Rotation 43degrees
Stick Dig Force - Standard 9894lb 4487.85kg
Bucket Dig Force - Ext 12065lb 5472.6kg
Bucket Dig Force - Standard 3000lb 1360.78kg
Dig Depth - Ext 18.2ft in 5545mm
Dig Depth - Standard 14.5ft in 4.42m
E-Stick Extended (1) 18.16ft in 5.54m
E-Stick Extended (2) 21.9ft in 6.68m
E-Stick Extended (3) 7836lb 3554.36kg
E-Stick Extended (4) 18.5lb 8.4kg
E-Stick Extended (5) 5780lb 2621.77kg
E-Stick Retracted (1) 18.68ft in 5.7m
E-Stick Retracted (2) 7704lb 3494.48kg
E-Stick Retracted (3) 8839lb 4009.31kg
E-Stick Retracted (4) 5.83lb 2.65kg
Load Height - Ext 13.86ft in 4223mm
Reach At Load Height - Ext 8.88ft in 2706mm
Reach From Swing Pivot - Standard 18.5ft in 5.64m
Stick Lift At 2440 Mm (8 Ft) - Standard 11.42lb 5.19kg

10 Dimensions Dimensions

Transport Length 22.91ft in 6980mm
Transport Width 7.72ft in 2352mm
Transport Height 11.77ft in 3585mm
Wheelbase 6.89ft in 2100mm
Ground Clearance 0.98ft in 297mm
Height To Top Of Suspended Cab 9.09ft in 2770mm

11 Loader Dimensions

Reach At Max Dump Height 2.4ft in 730mm
Dig Depth 4.14in 105mm
Dump Height At Maximum Angle - Single Tilt 4ft in 1.22m
Dump Reach At Maximum Angle - Single Tilt 89ft in 27.13m
Lift Capacity At Full Height 5780lb 2621.77kg
Bucket Width - General Purpose 2.42 ft
Bucket Capacity 1yd3 0.76m3
Bucket Width 89.06in 2262mm
Bucket Breakout Force - Single Tilt 35.42lb 16.07kg
Dig Depth - Single Tilt 1.25in 31.75mm
Bucket Breakout Force 9030lb 40.17kN

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.