Specification sheet Backhoe Loader Ref caterpillar-416-series-ii-loader-backhoe
Caterpillar 416 Series II
The Caterpillar 416 Series II is a backhoe loader with a 61.69 hp engine, a 1 yd³ (0.76 m³) bucket, and a dig depth of 14.21 ft (4,330 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
61.69hp
46kW
Net Power Bucket capacity
1yd³
0.76m³
Dig depth
14.21ft
4,330mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Caterpillar 416 Series II sits below the median for its class:
- Engine power 62 hp less powerful than 81% (n=282)
- Dig depth 14.2 ft shallower-digging than 70% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2351 | |
| Engine Model | 4.236 | |
| Gross Power | 67.1hp | 50kw |
| Net Power | 61.7hp | 46kw |
| Power Measured @ | 2400rpm | |
| Displacement | 235.6cu in | 3.9L |
02 Operational Specification
| Operating Weight 2wd | 13706.2lb | 6217kg |
|---|---|---|
| Fuel Capacity | 28.1gal | 106L |
| Operating Weight 4wd | 13970.7lb | 6337kg |
| Hydraulic System Fluid Capacity | 20.9gal | 79L |
| Oil System Fluid Capacity | 1.9gal | 7L |
| Cooling System Fluid Capacity | 5.6gal | 21L |
| Transmission Fluid Capacity | 2.7gal | 10L |
| Front Axle Fluid Capacity | 2gal | 7.5L |
| Rear Axle Fluid Capacity | 4.9gal | 18.5L |
| Turning Radius | 12.9ft in | 3905mm |
| Tire Size Front - 2wd / 4wd | 11L-16 10PR/10.5-20 10PR | |
| Rear Tires Size 2wd/4wd | 16.9-24 8PR/ 19.5L-24 8PR | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 52amps |
03 Transmission Specification
| Transmission Type | fully synchromesh | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 19.7mph | 31.7km/h |
| Max Speed Reverse | 19.8mph | 31.8km/h |
04 Hydraulic Specification
| Pump Type | Variable flow | |
|---|---|---|
| Pump Flow Capacity | 28.6gal/min | 108L/min |
| Relief Valve Pressure | 2700psi | 18615.9kPa |
05 Backhoe Dimensions
| Load Height - Std | 10.95ft in | 3335mm |
|---|---|---|
| Reach From Swivel - Std | 17.76ft in | 5413mm |
| Dig Depth - Std | 14.21ft in | 4330mm |
| Reach At Load Height - Std | 7.21ft in | 2195mm |
| Load Height - Ext | 13.27ft in | 4044mm |
| Bucket Dig Force - Ext | 10260lb | 4653.86kg |
| Bucket Dig Force - Std | 10440lb | 4735.51kg |
| Dig Depth - Ext | 18.5ft in | 5636mm |
| Reach At Load Height - Ext | 10.42ft in | 3174mm |
| Load At Max Lift - Ext | 2149.51lb | 975kg |
| Load At Max Lift - Std | 3439.22lb | 1560kg |
| Reach From Swivel - Ext | 21.86ft in | 6661mm |
06 Dimensions Dimensions
| Transport Length | 22.44ft in | 6838mm |
|---|---|---|
| Transport Width | 7.43ft in | 2262mm |
| Transport Height | 11.32ft in | 3448mm |
| Wheelbase | 6.89ft in | 2100mm |
| Ground Clearance | 0.98ft in | 297mm |
| Height To Top Of Suspended Cab | 8.93ft in | 2719mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.66ft in | 2637mm |
|---|---|---|
| Reach At Max Dump Height | 2.31ft in | 704mm |
| Dig Depth | 4.22in | 107mm |
| Bucket Breakout Force | 7508.62lb | 33.4kN |
| Bucket Width | 89.06in | 2262mm |
| Bucket Capacity | 1yd3 | 0.76m3 |
| Lift Capacity At Full Height | 5249.21lb | 2381kg |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.