Specification sheet Wheel Loader Ref case-w20c-wheel-loader
Case W20C
The Case W20C is a wheel loader with a 110 hp engine, and a 1.76 yd³ (1.34 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
110hp
82.1kW
Net Power Bucket capacity
1.76yd³
1.34m³
◆Where it sits in its classnot positioned
This machine has no published operating weight, so it cannot be placed in a wheel-loader weight band.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | Case | |
| Engine Model | A504BD | |
| Net Power | 110hp | 82.1kw |
| Gross Power | 123hp | 91.8kw |
| Power Measured @ | 2200rpm | |
| Displacement | 504.1cu in | 8.3L |
| Gross Torque | 375lb ft | 508.4Nm |
| Torque Measured @ | 1400rpm | |
| Bore | 4.7in | 117mm |
| Stroke | 5in | 127mm |
02 Operational Specification
| Fuel Capacity | 50gal | 189L |
|---|---|---|
| Hydraulic System Fluid Capacity | 31gal | 117L |
| Engine Oil Fluid Capacity | 4.3gal | 16L |
| Cooling System Fluid Capacity | 13gal | 49L |
| Transmission Fluid Capacity | 8gal | 30L |
| Front Axle/Diff Fluid Capacity | 3.5gal | 13L |
| Rear Axle/Diff Fluid Capacity | 3.5gal | 13L |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 40amps |
03 Transmission Specification
| Transmission Type | Power Shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 23.3mph | 37.5km/h |
| Max Speed - Reverse | 9.7mph | 15.7km/h |
04 Hydraulic System Specification
| Pump Flow Capacity | 48.1gal/min | 182L/min |
|---|---|---|
| Raise Time | 6.1sec | |
| Dump Time | 1.7sec | |
| Lower Time | 3.5sec | |
| Pump Type | Dual-Stage |
05 Bucket Dimensions
| Bucket Capacity - Struck | 1.42yd3 | 1.08m3 |
|---|---|---|
| Bucket Capacity - Heaped | 1.76yd3 | 1.34m3 |
06 Dimensions Dimensions
| Ground Clearance | 1.42ft in | 432mm |
|---|---|---|
| Length With Bucket On Ground | 20.08ft in | 6120mm |
| Width Over Tires | 7.58ft in | 2310mm |
| Height To Top Of Cab | 10.24ft in | 3120mm |
| Wheelbase | 8.99ft in | 2740mm |
| Hinge Pin - Max Height | 11.62ft in | 3540mm |
| Reach At Max Lift And Dump | 3.17ft in | 965mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.