Specification sheet Wheel Loader Ref case-w18-wheel-loader
Case W18
The Case W18 is a wheel loader with a 103 hp engine, and a 1.76 yd³ (1.34 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
103hp
76.9kW
Net Power Bucket capacity
1.76yd³
1.34m³
◆Where it sits in its classnot positioned
This machine has no published operating weight, so it cannot be placed in a wheel-loader weight band.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Model | Case A401BD | |
| Net Power | 103hp | 76.9kw |
| Air Cleaner | Two element ,dry type | |
| Gross Power | 114hp | 85.1kw |
| Torque | 298lb ft | 404.1Nm |
| Power Measured @ | 220rpm | |
| Displacement | 401cu in | 6.6L |
| Torque Measured @ | 1450rpm | |
| Bore | 4.2in | 105mm |
| Stroke | 5in | 127mm |
02 Operational Specification
| Fuel Capacity | 50gal | 189.3L |
|---|---|---|
| Hydraulic System Fluid Capacity | 29gal | 109.8L |
| Engine Oil Fluid Capacity | 3gal | 11.4L |
| Cooling System Fluid Capacity | 13gal | 49.3L |
| Transmission Fluid Capacity | 9gal | 34.1L |
| Front Axle/Diff Fluid Capacity | 4.5gal | 17.1L |
| Rear Axle/Diff Fluid Capacity | 4.5gal | 17.1L |
| Turning Radius | 32.6ft in | 9930mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 40amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 1400X24,G2 |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 23mph | 37.1km/h |
| Max Speed - Reverse | 9.5mph | 15.3km/h |
04 Hydraulic System Specification
| Raise Time | 6.1sec | |
|---|---|---|
| Dump Time | 3.5sec | |
| Lower Time | 1.7sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.17ft in | 2794mm |
|---|---|---|
| Bucket Capacity - Struck | 1.42yd3 | 1.08m3 |
| Bucket Capacity - Heaped | 1.76yd3 | 1.34m3 |
06 Dimensions Dimensions
| Ground Clearance | 1.3ft in | 394mm |
|---|---|---|
| Length With Bucket On Ground | 19.11ft in | 5824.73mm |
| Width Over Tires | 7.34ft in | 2235mm |
| Height To Top Of Cab | 10.38ft in | 3162mm |
| Wheelbase | 9ft in | 2743mm |
| Hinge Pin - Max Height | 15ft in | 4572mm |
| Reach At Max Lift And Dump | 6.99ft in | 2130mm |
?Questions & answersfrom this machine's data
- What engine does a Case W18 wheel loader have?
- A Case W18 wheel loader is powered by a Case A401BD engine producing 103 hp (76.9 kW).
- What size bucket does a Case W18 wheel loader have?
- A Case W18 wheel loader has a bucket capacity of 1.8 yd³ (1.3 m³).
- How much fuel does a Case W18 wheel loader hold?
- A Case W18 wheel loader has a fuel capacity of 50 gal (189.3 L).
- What is the ground clearance of a Case W18 wheel loader?
- A Case W18 wheel loader has a ground clearance of 1.3 ft (394 mm).
- How long is a Case W18 wheel loader?
- A Case W18 wheel loader has an overall length of 19.1 ft (5,824.7 mm) with the bucket on the ground.
- How fast does a Case W18 wheel loader travel?
- A Case W18 wheel loader has a maximum forward travel speed of 23 mph (37.1 km/h).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.