Specification sheet Wheel Loader Ref case-w11-wheel-loader
Case W11
The Case W11 is a wheel loader with a 55 hp engine, and a 0.75 yd³ (0.58 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
55hp
41kW
Net Power Bucket capacity
0.75yd³
0.58m³
◆Where it sits in its classnot positioned
This machine has no published operating weight, so it cannot be placed in a wheel-loader weight band.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Case | |
| Engine Model | G207D | |
| Net Power | 55hp | 41kw |
| Gross Power | 60hp | 44.7kw |
| Power Measured @ | 2100rpm | |
| Displacement | 207.5cu in | 3.4L |
| Torque Measured @ | 1300rpm | |
| Bore | 4.1in | 102mm |
| Stroke | 4.2in | 105mm |
02 Operational Specification
| Fuel Capacity | 28.1gal | 106L |
|---|---|---|
| Hydraulic System Fluid Capacity | 14.1gal | 53L |
| Engine Oil Fluid Capacity | 1.8gal | 6.7L |
| Cooling System Fluid Capacity | 4gal | 15.2L |
| Transmission Fluid Capacity | 3.6gal | 13.3L |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 42amps | |
| Rear Axle Oscillation | 24degrees |
03 Transmission Specification
| Transmission Type | Powershift | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 22.7mph | 36.6km/h |
| Max Speed - Reverse | 22.7mph | 36.6km/h |
04 Hydraulic System Specification
| Raise Time | 5.2sec | |
|---|---|---|
| Dump Time | 1.9sec | |
| Lower Time | 5.3sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.67ft in | 2640mm |
|---|---|---|
| Bucket Capacity - Heaped | 0.75yd3 | 0.58m3 |
| Bucket Capacity - Struck | 0.61yd3 | 0.47m3 |
06 Dimensions Dimensions
| Ground Clearance | 0.84ft in | 254mm |
|---|---|---|
| Width Over Tires | 5.68ft in | 1730mm |
| Height To Top Of Cab | 7.85ft in | 2390mm |
| Wheelbase | 7.68ft in | 2340mm |
| Hinge Pin - Max Height | 10.34ft in | 3150mm |
| Overall Height | 13ft in | 3960mm |
| Overall Length | 16.77ft in | 5110mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.