Specification sheet Backhoe Loader Ref case-780-loader-backhoe
Case 780
The Case 780 is a backhoe loader with an operating weight of 16,999.85 lb (7,711 kg), a 111 hp engine, a 1.5 yd³ (1.15 m³) bucket, and a dig depth of 18.34 ft (5,588 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
16,999.85lb
7,711kg
Engine power
111hp
82.78kW
Net Power Bucket capacity
1.5yd³
1.15m³
Dig depth
18.34ft
5,588mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Case 780 sits at the heavy end of its class:
- Engine power 111 hp more powerful than 96% (n=282)
- Dig depth 18.3 ft deeper-digging than 99% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Case | |
| Engine Model | A336 BDT | |
| Gross Power | 120hp | 89.5kw |
| Net Power | 111hp | 82.8kw |
| Power Measured @ | 2200rpm | |
| Torque Measured @ | 2200rpm | |
| Net Max Torque | 285lb ft | 386.5Nm |
| Displacement | 336cu in | 5.6L |
| Bore | 4.7in | 117mm |
| Stroke | 5in | 127mm |
02 Operational Specification
| Fuel Capacity | 35gal | 132.4L |
|---|---|---|
| Max Weight | 16999.9lb | 7711kg |
| Oil System Fluid Capacity | 2.5gal | 9.4L |
| Cooling System Fluid Capacity | 6.5gal | 24.6L |
| Transmission Fluid Capacity | 5gal | 18.9L |
| Rear Axle Fluid Capacity | 4gal | 15.1L |
| Tire Size Front - 2wd / 4wd | 9.00 * 20 , 10PR | |
| Rear Tires Size 2wd/4wd | 18.4 * 24 , 12PR , R4 | |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 95amps |
03 Transmission Specification
| Transmission Type | Full powershift | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 17.4mph | 27.9km/h |
| Max Speed Reverse | 17.4mph | 27.9km/h |
04 Hydraulic Specification
| Pump Flow Capacity | 23gal/min | 87.1L/min |
|---|---|---|
| Relief Valve Pressure | 2050psi | 14134.3kPa |
05 Backhoe Dimensions
| Load Height - Std | 12.71ft in | 3874mm |
|---|---|---|
| Reach From Swivel - Std | 22.55ft in | 6871mm |
| Dig Depth - Std | 18.34ft in | 5588mm |
| Reach At Load Height - Std | 7.3ft in | 2225.04mm |
| Bucket Dig Force - Std | 13332lb | 6047.3kg |
06 Dimensions Dimensions
| Transport Length | 24.59ft in | 7493mm |
|---|---|---|
| Transport Width | 7.92ft in | 2413mm |
| Transport Height | 13.26ft in | 4039mm |
| Wheelbase | 7.26ft in | 2210mm |
| Ground Clearance | 1.3ft in | 394mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.84ft in | 2692mm |
|---|---|---|
| Reach At Max Dump Height | 5.61ft in | 1708mm |
| Lift Capacity At Full Height | 5400lb | 2449.4kg |
| Bucket Width | 95in | 2413mm |
| Bucket Capacity | 1.5yd3 | 1.15m3 |
| Bucket Breakout Force | 16000lb | 71.18kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.