Specification sheet Backhoe Loader Ref case-695-super-r-loader-backhoe
Case 695 Super R
The Case 695 Super R is a backhoe loader with an operating weight of 19,400.69 lb (8,800 kg), and a dig depth of 15.16 ft (4,620 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
19,400.69lb
8,800kg
Dig depth
15.16ft
4,620mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Case 695 Super R sits above the median for its class:
- Dig depth 15.2 ft deeper-digging than 65% (n=256)
Not positioned on engine power — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Operational Specification
| Fuel Capacity | 35.7gal | 135L |
|---|---|---|
| Max Weight | 19400.7lb | 8800kg |
| Hydraulic System Fluid Capacity | 18.5gal | 70L |
| Oil System Fluid Capacity | 3.5gal | 13L |
| Transmission Fluid Capacity | 4.8gal | 18L |
| Front Axle Fluid Capacity | 2.7gal | 10L |
| Rear Axle Fluid Capacity | 2.7gal | 10L |
| Turning Radius | 17.5ft in | 5320mm |
| Tire Size Front - 2wd / 4wd | 16.9x24 R4 12PR ISG GY | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 90amps |
02 Transmission Specification
| Transmission Type | Powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 25.8mph | 41.4km/h |
| Max Speed Reverse | 8.7mph | 14km/h |
03 Hydraulic Specification
| Pump Type | Gear Pump | |
|---|---|---|
| Pump Flow Capacity | 42.3gal/min | 160L/min |
| Relief Valve Pressure | 3045.8psi | 21000kPa |
04 Backhoe Dimensions
| Load Height - Std | 12.9ft in | 3930mm |
|---|---|---|
| Reach From Swivel - Std | 19.36ft in | 5900mm |
| Dig Depth - Std | 15.16ft in | 4620mm |
| Reach At Load Height - Std | 6.24ft in | 1900mm |
| Bucket Dig Force - Ext | 5826.82lb | 2643kg |
| Load At Max Lift - Ext | 2480.21lb | 1125kg |
| Load At Max Lift - Std | 3251.82lb | 1475kg |
| Load Height - Ext | 15.16ft in | 4620mm |
| Dig Depth - Ext | 19.07ft in | 5810mm |
| Reach At Load Height - Ext | 9.32ft in | 2840mm |
| Bucket Dig Force - Std | 8322.45lb | 3775kg |
| Reach From Swivel - Ext | 22.94ft in | 6990mm |
05 Dimensions Dimensions
| Transport Length | 18.87ft in | 5750mm |
|---|---|---|
| Transport Width | 7.88ft in | 2400mm |
| Transport Height | 12.96ft in | 3950mm |
| Wheelbase | 7.22ft in | 2200mm |
| Ground Clearance | 1.48ft in | 450mm |
| Height To Top Of Suspended Cab | 9.52ft in | 2900mm |
06 Loader Dimensions
| Clearance At Max Dump Height | 8.99ft in | 2740mm |
|---|---|---|
| Reach At Max Dump Height | 2.47ft in | 750mm |
| Dig Depth | 3.35in | 85mm |
| Bucket Breakout Force | 1240945.38lb | 5520kN |
| Bucket Width | 94.49in | 2400mm |
| Lift Capacity At Full Height | 7716.18lb | 3500kg |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.