Specification sheet Backhoe Loader Ref case-695-4x4x4-loader-backhoe
Case 695 4x4x4
The Case 695 4x4x4 is a backhoe loader with a 106.3 hp engine, a 1.57 yd³ (1.2 m³) bucket, and a dig depth of 16.34 ft (4,980 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
106.3hp
79.2kW
Gross Power Bucket capacity
1.57yd³
1.2m³
Dig depth
16.34ft
4,980mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Case 695 4x4x4 sits at the heavy end of its class:
- Engine power 106 hp more powerful than 92% (n=282)
- Dig depth 16.3 ft deeper-digging than 86% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Model | CNH | |
|---|---|---|
| Gross Power | 106.3hp | 79.2kw |
02 Operational Specification
| Fuel Capacity | 33.9gal | 128L |
|---|
03 Transmission Specification
| Transmission Type | powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 24.4mph | 39.2km/h |
| Max Speed Reverse | 24.4mph | 39.2km/h |
04 Hydraulic Specification
| Pump Flow Capacity | 42.3gal/min | 160L/min |
|---|---|---|
| Relief Valve Pressure | 3045.8psi | 21000kPa |
05 Backhoe Dimensions
| Load Height - Std | 13.06ft in | 3980mm |
|---|---|---|
| Reach From Swivel - Std | 19.3ft in | 5880mm |
| Dig Depth - Std | 16.34ft in | 4980mm |
| Bucket Dig Force - Std | 14387.37lb | 6526kg |
| Load At Max Lift - Std | 3373.08lb | 1530kg |
06 Dimensions Dimensions
| Transport Length | 18.87ft in | 5750mm |
|---|---|---|
| Transport Width | 7.88ft in | 2400mm |
| Transport Height | 12.93ft in | 3940mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 11.55ft in | 3520mm |
|---|---|---|
| Lift Capacity At Full Height | 7716.18lb | 3500kg |
| Bucket Capacity | 1.57yd3 | 1.2m3 |
| Bucket Width | 94.49in | 2400mm |
| Bucket Breakout Force | _- | 55.2kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.