Specification sheet Backhoe Loader Ref case-680l-loader-backhoe

Case 680L

The Case 680L is a backhoe loader with a 90 hp engine, a 1.5 yd³ (1.15 m³) bucket, and a dig depth of 16.5 ft (5,029.2 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Engine power
90hp
67.12kW
Net Power
Bucket capacity
1.5yd³
1.15m³
Dig depth
16.5ft
5,029.2mm

Where it sits in its classpercentile · backhoe loaders

Among 294 backhoe loaders , the Case 680L sits in the middle of its class:

  • Engine power 90 hp more powerful than 57% (n=282)
  • Dig depth 16.5 ft deeper-digging than 89% (n=256)

Scale drawingdrawn to scale · mm

4481B356C7010A
Side elevation
4481B2438D
Front elevation

01 Engine Specification

Number Of Cylinders 6
Engine Make Case
Engine Model 6-590
Net Power 90hp 67.2kw
Gross Power 101hp 75.4kw
Power Measured @ 2200rpm
Torque Measured @ 1200rpm
Net Max Torque 273lb ft 370.2Nm
Displacement 359cu in 5.9L
Bore 4.1in 102mm
Stroke 4.8in 120mm

02 Operational Specification

Operating Weight 2wd 17218lb 7810kg
Fuel Capacity 43.1gal 162.8L
Operating Weight 4wd 17922lb 8129.3kg
Hydraulic System Fluid Capacity 14.3gal 53.8L
Oil System Fluid Capacity 3.8gal 14.2L
Cooling System Fluid Capacity 6.8gal 25.6L
Transmission Fluid Capacity 4gal 15.1L
Tire Size Front - 2wd / 4wd 11 * 16
Rear Tires Size 2wd/4wd 19.5L* 24
Operating Voltage 12V
Alternator Supplied Amperage 65amps

03 Transmission Specification

Transmission Type Power shift
Number Of Forward Gears 3
Number Of Reverse Gears 3
Max Speed - Forward 17.5mph 28.2km/h
Max Speed Reverse 17.5mph 28.2km/h

04 Hydraulic Specification

Pump Type Engine mounted , positive displacement , gear type pump
Pump Flow Capacity 18.7gal/min 70.8L/min
Relief Valve Pressure 2000psi 13789.6kPa

05 Backhoe Dimensions

Load Height - Std 11.26ft in 3432.05mm
Reach From Swivel - Std 19.96ft in 6083.81mm
Dig Depth - Std 16.5ft in 5029.2mm
Reach At Load Height - Std 8.78ft in 2676.15mm
Load Height - Ext 13.11ft in 3995.93mm
Bucket Dig Force - Ext 11812lb 5357.84kg
Reach From Swivel - Ext 24ft in 7315.2mm
Dig Depth - Ext 20.6ft in 6278.88mm
Reach At Load Height - Ext 11.11ft in 3385.42mm
Bucket Dig Force - Std 11289lb 5120.61kg

06 Dimensions Dimensions

Transport Length 23ft in 7010.4mm
Transport Width 8ft in 2438.4mm
Transport Height 14.7ft in 4480.57mm
Wheelbase 7.26ft in 2210mm
Ground Clearance 1.17ft in 356mm
Height To Top Of Suspended Cab 9.7ft in 2956.56mm
Front Wheel Tread Width 5.12in 129.93mm
Rear Tread Range 6.65in 168.91mm

07 Loader Dimensions

Clearance At Max Dump Height 9.5ft in 2895.6mm
Reach At Max Dump Height 4.17ft in 1270mm
Dig Depth 2.52in 64mm
Lift Capacity At Full Height 7200lb 3265.87kg
Bucket Capacity 1.5yd3 1.15m3
Bucket Width 96in 2438.4mm
Bucket Breakout Force 10020lb 44.58kN

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.