Specification sheet Backhoe Loader Ref case-680k-loader-backhoe
Case 680K
The Case 680K is a backhoe loader with an operating weight of 14,900 lb (6,758.53 kg), a 90 hp engine, and a dig depth of 16.47 ft (5,020 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
14,900lb
6,758.53kg
Engine power
90hp
67.12kW
Net Power Dig depth
16.47ft
5,020mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Case 680K sits in the middle of its class:
- Engine power 90 hp more powerful than 57% (n=282)
- Dig depth 16.5 ft deeper-digging than 88% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | J.I. Case | |
|---|---|---|
| Gross Power | 101hp | 75.4kw |
| Net Power | 90hp | 67.2kw |
| Power Measured @ | 2200rpm | |
| Torque Measured @ | 1200rpm | |
| Net Max Torque | 260lb ft | 352.6Nm |
| Displacement | 360.1cu in | 5.9L |
| Bore | 4.1in | 102mm |
| Stroke | 4.8in | 120mm |
02 Operational Specification
| Max Weight | 14900lb | 6758.6kg |
|---|---|---|
| Hydraulic System Fluid Capacity | 13.7gal | 51.9L |
| Oil System Fluid Capacity | 3.1gal | 11.4L |
| Cooling System Fluid Capacity | 6.8gal | 25.6L |
| Tire Size Front - 2wd / 4wd | 12.5Lx16 | |
| Rear Tires Size 2wd/4wd | 16.9x24 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 40amps |
03 Transmission Specification
| Transmission Type | Power shift | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 19.4mph | 31.1km/h |
| Max Speed Reverse | 19.4mph | 31.1km/h |
04 Hydraulic Specification
| Pump Flow Capacity | 44.4gal/min | 168.1L/min |
|---|---|---|
| Relief Valve Pressure | 2000psi | 13789.6kPa |
05 Backhoe Dimensions
| Load Height - Std | 11.19ft in | 3410mm |
|---|---|---|
| Reach From Swivel - Std | 19.79ft in | 6030mm |
| Dig Depth - Std | 16.47ft in | 5020mm |
| Dig Depth - Ext | 21.69ft in | 6610mm |
| Load Height - Ext | 13.92ft in | 4240mm |
| Bucket Dig Force - Ext | 11812lb | 5357.84kg |
| Bucket Dig Force - Std | 11289lb | 5120.61kg |
| Reach From Swivel - Ext | 23.99ft in | 7310mm |
06 Dimensions Dimensions
| Transport Length | 22.97ft in | 7000mm |
|---|---|---|
| Transport Width | 7.52ft in | 2290mm |
| Transport Height | 11.68ft in | 3560mm |
| Wheelbase | 7.22ft in | 2200mm |
| Front Wheel Tread Width | 71.66in | 1820mm |
| Height To Top Of Suspended Cab | 9.59ft in | 2920mm |
| Rear Tread Range | 66.93in | 1700mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 9.42ft in | 2870mm |
|---|---|---|
| Reach At Max Dump Height | 2.56ft in | 780mm |
| Lift Capacity At Full Height | 5900lb | 2676.2kg |
| Bucket Width | 86in | 2184.4mm |
| Bucket Breakout Force | 10020lb | 44.58kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.