Specification sheet Backhoe Loader Ref case-680ck-loader-backhoe
Case 680CK
The Case 680CK is a backhoe loader with an operating weight of 14,499.81 lb (6,577 kg), a 64 hp engine, and a dig depth of 15.98 ft (4,870 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
14,499.81lb
6,577kg
Engine power
64hp
47.73kW
Net Power Dig depth
15.98ft
4,870mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Case 680CK sits below the median for its class:
- Engine power 64 hp less powerful than 78% (n=282)
- Dig depth 16 ft deeper-digging than 81% (n=256)
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | J.I. Case | |
| Engine Model | 267D | |
| Gross Power | 71hp | 53kw |
| Net Power | 64hp | 47.8kw |
| Power Measured @ | 2000rpm | |
| Torque Measured @ | 1300rpm | |
| Net Max Torque | 205lb ft | 278Nm |
| Displacement | 268.6cu in | 4.4L |
| Bore | 4.2in | 105mm |
| Stroke | 5in | 127mm |
02 Operational Specification
| Fuel Capacity | 28gal | 106L |
|---|---|---|
| Max Weight | 14499.9lb | 6577kg |
| Hydraulic System Fluid Capacity | 17.5gal | 66.3L |
| Tire Size Front - 2wd / 4wd | 11Lx16 | |
| Rear Tires Size 2wd/4wd | 16.9x24 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 55amps |
03 Transmission Specification
| Transmission Type | Power shuttle | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 18.1mph | 29km/h |
| Max Speed Reverse | 23mph | 37km/h |
04 Hydraulic Specification
| Pump Type | Open center | |
|---|---|---|
| Pump Flow Capacity | 25gal/min | 94.7L/min |
| Relief Valve Pressure | 2150psi | 14823.8kPa |
05 Backhoe Dimensions
| Load Height - Std | 11.39ft in | 3470mm |
|---|---|---|
| Reach From Swivel - Std | 19.1ft in | 5820mm |
| Dig Depth - Std | 15.98ft in | 4870mm |
06 Dimensions Dimensions
| Transport Height | 7.98ft in | 2430mm |
|---|---|---|
| Wheelbase | 6.7ft in | 2040mm |
| Ground Clearance | 1.09ft in | 330mm |
| Front Wheel Tread Width | 70.48in | 1790mm |
| Rear Tread Range | 66.54in | 1690mm |
07 Loader Dimensions
| Reach At Max Dump Height | 5.52ft in | 1680mm |
|---|---|---|
| Lift Capacity At Full Height | 5000lb | 2267.97kg |
| Bucket Breakout Force | 1024679.08lb | 4558kN |
| Bucket Width | 84.65in | 2150mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.