Specification sheet Backhoe Loader Ref case-590sl-loader-backhoe
Case 590SL
The Case 590SL is a backhoe loader with a 88 hp engine, a 1.25 yd³ (0.96 m³) bucket, and a dig depth of 15.7 ft (4,785.36 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
88hp
65.63kW
Net Power Bucket capacity
1.25yd³
0.96m³
Dig depth
15.7ft
4,785.36mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Case 590SL sits in the middle of its class:
- Engine power 88 hp more powerful than 53% (n=282)
- Dig depth 15.7 ft deeper-digging than 75% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Case | |
| Engine Model | 4T-390 | |
| Net Power | 88hp | 65.7kw |
| Gross Power | 95hp | 70.9kw |
| Power Measured @ | 2200rpm | |
| Torque Measured @ | 1400rpm | |
| Net Max Torque | 260lb ft | 352.6Nm |
| Aspiration | Turbocharged | |
| Displacement | 239.3cu in | 4L |
| Bore | 4.1in | 102.2mm |
| Stroke | 4.8in | 119.9mm |
02 Operational Specification
| Operating Weight 2wd | 15128lb | 6862kg |
|---|---|---|
| Fuel Capacity | 31.4gal | 118.9L |
| Operating Weight 4wd | 15414lb | 6991.7kg |
| Hydraulic System Fluid Capacity | 33gal | 125L |
| Oil System Fluid Capacity | 2.9gal | 11L |
| Cooling System Fluid Capacity | 4.4gal | 16.5L |
| Transmission Fluid Capacity | 4.9gal | 18.5L |
| Front Axle Fluid Capacity | 1.8gal | 6.6L |
| Rear Axle Fluid Capacity | 3gal | 11.2L |
| Tire Size Front - 2wd / 4wd | 14.5/.75 x 16.1, 10PR / 14 x 17.5, 10PR | |
| Rear Tires Size 2wd/4wd | 21L x 24, 10PR | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 65amps |
03 Transmission Specification
| Transmission Type | Fully synchronized 4-speed forward reverse shuttle | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 26.3mph | 42.4km/h |
| Max Speed Reverse | 31.6mph | 50.9km/h |
04 Hydraulic Specification
| Pump Type | Front mounted, positive displacement, gear-type tandem | |
|---|---|---|
| Pump Flow Capacity | 30gal/min | 113.6L/min |
| Relief Valve Pressure | 3000psi | 20684.3kPa |
05 Backhoe Dimensions
| Load Height - Std | 11.5ft in | 3505.2mm |
|---|---|---|
| Reach From Swivel - Std | 19.8ft in | 6035.04mm |
| Dig Depth - Std | 15.7ft in | 4785.36mm |
| Reach At Load Height - Std | 9.6ft in | 2926.08mm |
| Load At Max Lift - Std | 3430lb | 1555.83kg |
| Bucket Dig Force - Ext | 13126lb | 5953.86kg |
| Bucket Dig Force - Std | 13126lb | 5953.86kg |
| Dig Depth - Ext | 19.7ft in | 6004.56mm |
| Reach At Load Height - Ext | 12.11ft in | 3691.13mm |
| Load At Max Lift - Ext | 2260lb | 1025.12kg |
| Load Height - Ext | 14.1ft in | 4297.68mm |
| Reach From Swivel - Ext | 23.7ft in | 7223.76mm |
06 Dimensions Dimensions
| Transport Length | 23.6ft in | 7193.28mm |
|---|---|---|
| Transport Width | 7.8ft in | 2377.44mm |
| Transport Height | 11.6ft in | 3535.68mm |
| Wheelbase | 7ft in | 2133.6mm |
| Ground Clearance | 1.08ft in | 327.67mm |
| Rear Wheel Tread Width - Min | 63.8in | 1620.52mm |
| Height To Top Of Suspended Cab | 8.11ft in | 2471.93mm |
| Front Wheel Tread Width | 68.5in | 1739.9mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 9ft in | 2743.2mm |
|---|---|---|
| Reach At Max Dump Height | 2.16ft in | 657.86mm |
| Dig Depth | 3.8in | 96.52mm |
| Bucket Breakout Force | 8900lb | 39.59kN |
| Bucket Width | 93in | 2362.2mm |
| Bucket Capacity | 1.25yd3 | 0.96m3 |
| Lift Capacity At Full Height | 7000lb | 3175.15kg |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.