Specification sheet Backhoe Loader Ref case-590-super-m-series-iii-loader-backhoe
Case 590 Super M Series III
The Case 590 Super M Series III is a backhoe loader with an operating weight of 19,578 lb (8,881 kg), a 108.63 hp engine, a 1.3 yd³ (1 m³) bucket, and a dig depth of 15.92 ft (4,850 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
19,578lb
8,881kg
Engine power
108.63hp
81kW
Net Power Bucket capacity
1.3yd³
1m³
Dig depth
15.92ft
4,850mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Case 590 Super M Series III sits at the heavy end of its class:
- Engine power 109 hp more powerful than 94% (n=282)
- Dig depth 15.9 ft deeper-digging than 77% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2239 | |
| Engine Model | Family IV 445TA/E3, Tier III certified | |
| Gross Power | 110hp | 82kw |
| Net Power | 108.7hp | 81kw |
| Power Measured @ | 2200rpm | |
| Torque Measured @ | 1400rpm | |
| Net Torque Rise | 45% | |
| Net Max Torque | 372lb ft | 504.4Nm |
| Aspiration | turbocharged | |
| Displacement | 272cu in | 4.5L |
02 Operational Specification
| Operating Weight 2wd | 15268lb | 6926kg |
|---|---|---|
| Fuel Capacity | 42gal | 159L |
| Max Weight | 19578lb | 8881kg |
| Hydraulic System Fluid Capacity | 32.3gal | 122L |
| Oil System Fluid Capacity | 3.6gal | 13.6L |
| Cooling System Fluid Capacity | 4.8gal | 18L |
| Transmission Fluid Capacity | 5.2gal | 19.4L |
| Front Axle Fluid Capacity | 1.8gal | 6.7L |
| Rear Axle Fluid Capacity | 5gal | 18.6L |
| Turning Radius | 12.4ft in | 3755mm |
| Tire Size Front - 2wd / 4wd | 14.5/75x16.1/14x17.5 | |
| Rear Tires Size 2wd/4wd | 21Lx24/21Lx24 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 90amps |
03 Transmission Specification
| Transmission Type | 4-speed synchromesh with hydraulically actuated clutches | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 24.6mph | 39.5km/h |
| Max Speed Reverse | 29.5mph | 47.4km/h |
04 Hydraulic Specification
| Pump Type | Gear-type tandem | |
|---|---|---|
| Pump Flow Capacity | 42.5gal/min | 161L/min |
| Relief Valve Pressure | 3050psi | 21029kPa |
05 Backhoe Dimensions
| Load Height - Std | 11.42ft in | 3480mm |
|---|---|---|
| Reach From Swivel - Std | 19.68ft in | 5990mm |
| Dig Depth - Std | 15.92ft in | 4850mm |
| Reach At Load Height - Std | 9.5ft in | 2900mm |
| Load Height - Ext | 13.75ft in | 4190mm |
| Bucket Dig Force - Ext | 14718lb | 6675.98kg |
| Bucket Dig Force - Std | 14718lb | 6675.98kg |
| Dig Depth - Ext | 19.93ft in | 6070mm |
| Reach At Load Height - Ext | 12.75ft in | 3890mm |
| Load At Max Lift - Ext | 1940lb | 880kg |
| Load At Max Lift - Std | 2870lb | 1302kg |
| Reach From Swivel - Ext | 23.58ft in | 7190mm |
06 Dimensions Dimensions
| Transport Length | 23.58ft in | 7130mm |
|---|---|---|
| Transport Width | 7.75ft in | 2360mm |
| Transport Height | 11.19ft in | 3410mm |
| Wheelbase | 7.04ft in | 2150mm |
| Ground Clearance | 1.22ft in | 371mm |
| Height To Top Of Suspended Cab | 8.83ft in | 2690mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 9ft in | 2750mm |
|---|---|---|
| Reach At Max Dump Height | 2.21ft in | 699mm |
| Dig Depth | 3.8in | 96mm |
| Bucket Breakout Force | 10729lb | 47.73kN |
| Bucket Width | 93in | 2360mm |
| Bucket Capacity | 1.3yd3 | 1m3 |
| Lift Capacity At Full Height | 7327lb | 3323kg |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.