Specification sheet Backhoe Loader Ref case-580sl-loader-backhoe

Case 580SL

The Case 580SL is a backhoe loader with a 86 hp engine, a 1.01 yd³ (0.78 m³) bucket, and a dig depth of 14.5 ft (4,419.61 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Engine power
86hp
64.14kW
Net Power
Bucket capacity
1.01yd³
0.78m³
Dig depth
14.5ft
4,419.61mm

Where it sits in its classpercentile · backhoe loaders

Among 294 backhoe loaders , the Case 580SL sits in the middle of its class:

  • Engine power 86 hp more powerful than 50% (n=282)
  • Dig depth 14.5 ft shallower-digging than 55% (n=256)

Scale drawingdrawn to scale · mm

5852B381C6919A
Side elevation
5852B2195D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make Case
Engine Model 4T-390
Net Power 86hp 64.2kw
Gross Power 91hp 67.9kw
Power Measured @ 2200rpm
Torque Measured @ 1400rpm
Net Max Torque 252lb ft 341.7Nm
Aspiration Turbocharged
Displacement 239cu in 4L
Bore 4.1in 102.2mm
Stroke 4.8in 119.9mm

02 Operational Specification

Fuel Capacity 31.4gal 118.9L
Operating Weight 4wd 13283lb 6025.1kg
Hydraulic System Fluid Capacity 33gal 125L
Cooling System Fluid Capacity 4.4gal 16.5L
Transmission Fluid Capacity 4.9gal 18.5L
Front Axle Fluid Capacity 1.5gal 5.5L
Rear Axle Fluid Capacity 3.8gal 14.2L
Tire Size Front - 2wd / 4wd 11L x 16, 10PR / 12 x 16.5, 8PR
Rear Tires Size 2wd/4wd 17.5L x 24, 10PR / 19.5L x 24, 10PR
Operating Voltage 12V
Alternator Supplied Amperage 65amps

03 Transmission Specification

Transmission Type Fully synchronized 4-speed forward reverse shuttle
Number Of Forward Gears 4
Number Of Reverse Gears 4
Max Speed - Forward 25.8mph 41.6km/h
Max Speed Reverse 31.1mph 50.1km/h

04 Hydraulic Specification

Pump Type Front mounted, positive displacement, gear-type tandem
Pump Flow Capacity 27.5gal/min 104.1L/min
Relief Valve Pressure 2500psi 17236.9kPa

05 Backhoe Dimensions

Load Height - Std 11.2ft in 3413.76mm
Reach From Swivel - Std 18.11ft in 5516.88mm
Dig Depth - Std 14.5ft in 4419.61mm
Reach At Load Height - Std 8.9ft in 2712.72mm
Load At Max Lift - Std 2395lb 1086.36kg
Bucket Dig Force - Ext 13126lb 5953.86kg
Bucket Dig Force - Std 13126lb 5953.86kg
Dig Depth - Ext 18.3ft in 5577.84mm
Reach At Load Height - Ext 11.6ft in 3535.68mm
Load At Max Lift - Ext 1603lb 727.11kg
Load Height - Ext 13.3ft in 4053.84mm
Reach From Swivel - Ext 21.1ft in 6431.28mm

06 Dimensions Dimensions

Transport Length 22.7ft in 6918.96mm
Transport Width 7.2ft in 2194.56mm
Transport Height 19.2ft in 5852.16mm
Wheelbase 7ft in 2133.6mm
Ground Clearance 1.25ft in 381mm
Rear Wheel Tread Width - Min 61.2in 1554.48mm
Height To Top Of Suspended Cab 8.1ft in 2468.88mm
Front Wheel Tread Width 67.5in 1714.5mm

07 Loader Dimensions

Clearance At Max Dump Height 8.1ft in 2468.88mm
Reach At Max Dump Height 2.31ft in 703.58mm
Dig Depth 5.9in 149mm
Bucket Breakout Force 9667lb 43.01kN
Bucket Width 82in 2080mm
Bucket Capacity 1.01yd3 0.78m3
Lift Capacity At Full Height 6182lb 2804kg

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.