Specification sheet Backhoe Loader Ref case-580sk-loader-backhoe

Case 580SK

The Case 580SK is a backhoe loader with a 69.74 hp engine, a 1.03 yd³ (0.79 m³) bucket, and a dig depth of 14.3 ft (4,358.65 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Engine power
69.74hp
52kW
Net Power
Bucket capacity
1.03yd³
0.79m³
Dig depth
14.3ft
4,358.65mm

Where it sits in its classpercentile · backhoe loaders

Among 294 backhoe loaders , the Case 580SK sits below the median for its class:

  • Engine power 70 hp less powerful than 73% (n=282)
  • Dig depth 14.3 ft shallower-digging than 67% (n=256)

Scale drawingdrawn to scale · mm

3078B381C6919A
Side elevation
3078B2180D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make Case
Engine Model 4-390
Gross Power 75.1hp 56kw
Net Power 69.8hp 52kw
Power Measured @ 2200rpm
Torque Measured @ 1600rpm
Net Max Torque 188.1lb ft 255Nm
Displacement 239.3cu in 4L
Bore 4.1in 102.2mm
Stroke 4.8in 119.9mm

02 Operational Specification

Operating Weight 2wd 13426lb 6090kg
Fuel Capacity 25gal 94.7L
Operating Weight 4wd 13912lb 6310.4kg
Hydraulic System Fluid Capacity 29gal 109.8L
Oil System Fluid Capacity 2.9gal 11L
Cooling System Fluid Capacity 4.5gal 17L
Transmission Fluid Capacity 11.9gal 45.1L
Tire Size Front - 2wd / 4wd 11L x 16, 10PR / 12 x 16.5
Rear Tires Size 2wd/4wd 17.5L x 24, 10PR / 19.5L x 24
Operating Voltage 12V
Alternator Supplied Amperage 65amps

03 Transmission Specification

Transmission Type Fully synchronized 4-speed forward reverse shuttle
Number Of Forward Gears 4
Number Of Reverse Gears 4
Max Speed - Forward 24.8mph 39.9km/h
Max Speed Reverse 29.8mph 47.8km/h

04 Hydraulic Specification

Pump Type Front mounted, positive displacement, gear-type tandem
Pump Flow Capacity 26gal/min 98.5L/min
Relief Valve Pressure 2550psi 17581.7kPa

05 Backhoe Dimensions

Load Height - Std 9.6ft in 2926.08mm
Reach From Swivel - Std 18ft in 5486.4mm
Dig Depth - Std 14.3ft in 4358.65mm
Reach At Load Height - Std 5.6ft in 1706.88mm
Load At Max Lift - Std 1979.76lb 898kg
Bucket Dig Force - Ext 10760lb 4880.66kg
Bucket Dig Force - Std 10760lb 4880.66kg
Dig Depth - Ext 18.2ft in 5547.36mm
Reach At Load Height - Ext 9.31ft in 2834.64mm
Load At Max Lift - Ext 1159.64lb 526kg
Load Height - Ext 11ft in 3352.8mm
Reach From Swivel - Ext 21.1ft in 6431.28mm

06 Dimensions Dimensions

Transport Length 22.7ft in 6918.96mm
Transport Width 7.16ft in 2180mm
Transport Height 10.1ft in 3078.48mm
Wheelbase 6.99ft in 2130mm
Ground Clearance 1.25ft in 381mm
Rear Wheel Tread Width - Min 61.2in 1554.48mm
Height To Top Of Suspended Cab 8.9ft in 2712.72mm
Front Wheel Tread Width 67.5in 1714.5mm

07 Loader Dimensions

Clearance At Max Dump Height 8.1ft in 2468.88mm
Reach At Max Dump Height 2.25ft in 685.8mm
Dig Depth 4.61in 117mm
Bucket Breakout Force 7900lb 35.15kN
Bucket Width 82in 2080mm
Bucket Capacity 1.03yd3 0.79m3
Lift Capacity At Full Height 5500lb 2494.76kg

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.