Specification sheet Backhoe Loader Ref case-580se-loader-backhoe
Case 580SE
The Case 580SE is a backhoe loader with an operating weight of 10,660 lb (4,835.3 kg), a 63 hp engine, a 1 yd³ (0.77 m³) bucket, and a dig depth of 14.2 ft (4,328.16 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,660lb
4,835.3kg
Engine power
63hp
46.98kW
Net Power Bucket capacity
1yd³
0.77m³
Dig depth
14.2ft
4,328.16mm
◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Case 580SE sits below the median for its class:
- Engine power 63 hp less powerful than 79% (n=282)
- Dig depth 14.2 ft shallower-digging than 71% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Case | |
| Engine Model | 4-390 | |
| Gross Power | 69hp | 51.5kw |
| Net Power | 63hp | 47kw |
| Power Measured @ | 2200rpm | |
| Torque Measured @ | 1200rpm | |
| Net Max Torque | 181lb ft | 245.5Nm |
| Displacement | 238cu in | 3.9L |
| Bore | 4.1in | 102mm |
| Stroke | 4.8in | 120mm |
02 Operational Specification
| Fuel Capacity | 26.5gal | 100.4L |
|---|---|---|
| Max Weight | 10660lb | 4835.3kg |
| Hydraulic System Fluid Capacity | 12.5gal | 47.4L |
| Oil System Fluid Capacity | 2.8gal | 10.4L |
| Cooling System Fluid Capacity | 4.8gal | 17.9L |
| Tire Size Front - 2wd / 4wd | 11L * 16 | |
| Rear Tires Size 2wd/4wd | 17.5L*24 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 42amps |
03 Transmission Specification
| Transmission Type | Full power shuttle and torque converter | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21.9mph | 35.1km/h |
| Max Speed Reverse | 19.6mph | 31.5km/h |
04 Hydraulic Specification
| Pump Type | Front mounted , positive displacement , gear type , taden pump | |
|---|---|---|
| Pump Flow Capacity | 30gal/min | 113.6L/min |
| Relief Valve Pressure | 2000psi | 13789.6kPa |
05 Backhoe Dimensions
| Load Height - Std | 11.2ft in | 3413.76mm |
|---|---|---|
| Reach From Swivel - Std | 17.8ft in | 5425.44mm |
| Dig Depth - Std | 14.2ft in | 4328.16mm |
| Reach At Load Height - Std | 6.6ft in | 2010mm |
| Load Height - Ext | 14.3ft in | 4358.65mm |
| Bucket Dig Force - Ext | 11586lb | 5255.33kg |
| Reach From Swivel - Ext | 21.7ft in | 6614.16mm |
| Dig Depth - Ext | 18.3ft in | 5577.84mm |
| Reach At Load Height - Ext | 8.99ft in | 2740mm |
| Bucket Dig Force - Std | 11535lb | 5232.19kg |
06 Dimensions Dimensions
| Transport Length | 21.76ft in | 6630mm |
|---|---|---|
| Transport Width | 6.76ft in | 2060mm |
| Transport Height | 18.8ft in | 5730.24mm |
| Wheelbase | 10.77ft in | 3280mm |
| Ground Clearance | 0.77ft in | 232mm |
| Height To Top Of Suspended Cab | 8.81ft in | 2682.24mm |
| Front Wheel Tread Width | 63in | 1600mm |
| Rear Tread Range | 61.82in | 1570mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 10ft in | 3048mm |
|---|---|---|
| Reach At Max Dump Height | 2.26ft in | 686mm |
| Dig Depth | 5in | 127mm |
| Lift Capacity At Full Height | 4390lb | 1991.28kg |
| Bucket Capacity | 1yd3 | 0.77m3 |
| Bucket Width | 82in | 2082.81mm |
| Bucket Breakout Force | 7040lb | 31.32kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.