Case 580N
The Case 580N is a backhoe loader with an operating weight of 17,454 lb (7,917.01 kg), a 83.15 hp engine, a 0.88 yd³ (0.67 m³) bucket, and a dig depth of 14.77 ft (4,500 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Case 580N sits in the middle of its class:
- Engine power 83 hp less powerful than 54% (n=282)
- Dig depth 14.8 ft deeper-digging than 57% (n=256)
◇Scale drawingdrawn to scale · mm
Envelope assembled from published extents that may reflect different machine configurations (e.g. transport length with operating height).
01 Engine Specification
| Emissions Certification | Tier 4 Final | |
|---|---|---|
| Fuel Tank | 34.9gal | 132L |
| Number Of Cylinders | 4 | |
| Engine Make | 2239 | |
| Engine Model | FPT F5BFL413C | |
| Net Power | 83.2hp | 62kw |
| Gross Power | 89.9hp | 67kw |
| Power Measured @ | 2200rpm | |
| Torque Measured @ | 1400rpm | |
| Net Max Torque | 306.1lb ft | 415Nm |
| Aspiration | Turbocharged | |
| Displacement | 207.5cu in | 3.4L |
02 Operational Specification
| Backhoe Flow- Gallons | 28.6gal/min | 108L/min |
|---|---|---|
| Arm Breakout Force | 9487lb | 42.2kN |
| Operating Weight 2wd | 14564lb | 6606.2kg |
| Operating Weight 4wd | 15862lb | 7194.9kg |
| Fuel Capacity | 42.1gal | 159L |
| Max Weight | 17454lb | 7917.1kg |
| Hydraulic System Fluid Capacity | 28.1gal | 106L |
| Oil System Fluid Capacity | 3.6gal | 13.6L |
| Cooling System Fluid Capacity | 4.5gal | 16.8L |
| Transmission Fluid Capacity | 5.1gal | 19L |
| Front Axle Fluid Capacity | 2.1gal | 7.7L |
| Rear Axle Fluid Capacity | 3.6gal | 13.6L |
| Turning Radius | 11.4ft in | 3450mm |
| Tire Size Front - 2wd / 4wd | 11L x 16 / 12x 16.5 | |
| Rear Tires Size 2wd/4wd | 19.5L x 24 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 120amps |
03 Performance Specification
| Loader Bucket Heaped Capacity | 1.1yd3 | 0.8m3 |
|---|---|---|
| Dipper Stick Digging Force | 6628.3lb | 29.5kN |
| Bucket Digging Force (Iso) | 113lb | 51.3kg |
| Bucket Breakout Force, Sae | 11516511.6lb | 51228kN |
04 Transmission Specification
| Max Speed | 24.6mph | 39.6km/h |
|---|---|---|
| Transmission Type | Power shuttle | |
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 24.3mph | 39.2km/h |
| Max Speed Reverse | 29.1mph | 46.9km/h |
05 Tires Specification
| Front | 12L x 16.5 (4WD) |
|---|
06 Hydraulic Specification
| Pump Type | Parker P330 Single Selection Gear | |
|---|---|---|
| Pump Flow Capacity | 28.5gal/min | 107.9L/min |
| Relief Valve Pressure | 3350psi | 23097.5kPa |
07 Brakes Specification
| Service Brake | Wet Multi Disc |
|---|
08 Backhoe Dimensions
| Load Height - Std | 11.78ft in | 3590mm |
|---|---|---|
| Reach From Swivel - Std | 18.28ft in | 5570mm |
| Dig Depth - Std | 14.77ft in | 4500mm |
| Reach At Load Height - Std | 6.7ft in | 2040mm |
| Load Height - Ext | 14.11ft in | 4300mm |
| Dig Depth - Ext | 18.21ft in | 5550mm |
| Reach From Swivel - Ext | 21.66ft in | 6600mm |
| Reach At Load Height - Ext | 9.32ft in | 2840mm |
09 Dimensions Dimensions
| Transport Length | 23.43ft in | 7140mm |
|---|---|---|
| Transport Width | 6.8ft in | 2070mm |
| Transport Height | 10.83ft in | 3300mm |
| Wheelbase | 6.99ft in | 2130mm |
| Ground Clearance | 1.25ft in | 380mm |
| Height To Top Of Cab | 107.09in | 2720mm |
| Tailswing Radius | 11.32ft in | 3450mm |
| Operating Weight | 17751 Ibs (8052) kg (4WD) |
10 Loader Dimensions
| Clearance At Max Dump Height | 8.83ft in | 2690mm |
|---|---|---|
| Reach At Max Dump Height | 2.63ft in | 801mm |
| Dig Depth | 175.6in | 4460mm |
| Lift Capacity At Full Height | 6803.47lb | 3086kg |
| Bucket Width | 82in | 2082.81mm |
| Bucket Capacity | 0.88yd3 | 0.67m3 |
| Bucket Breakout Force | 10622lb | 47.25kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.