Specification sheet Backhoe Loader Ref case-580n-ep-loader-backhoe

Case 580N EP

The Case 580N EP is a backhoe loader with a 68.4 hp engine, and a dig depth of 14.9 ft (4,540 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Engine power
68.4hp
51kW
Net Power
Dig depth
14.9ft
4,540mm

Where it sits in its classpercentile · backhoe loaders

Among 294 backhoe loaders , the Case 580N EP sits below the median for its class:

  • Engine power 68 hp less powerful than 75% (n=282)
  • Dig depth 14.9 ft deeper-digging than 59% (n=256)

Scale drawingdrawn to scale · mm

2720B7020A
Side elevation
2720B2170C
Front elevation

Envelope assembled from published extents that may reflect different machine configurations (e.g. transport length with operating height).

01 Engine Specification

Fuel Diesel
Emission Tier Level Tier 4
Fan 7 blade suction ,Ratio- 1.1:1
Radiator Core Type Square wave
Transmission Type Power Shuttle
Horsepower - Gross 73.8hp 55kw
Horsepower -Net 68.4hp 51kw
Battery 850 cold-cranking amps
Fuel Tank 30.2gal 114L
Engine Model FPT F5HFL463D
Net Power 68.4hp 51kw
Gross Power 73.8hp 55kw
Net Torque 233.1lb ft 316Nm
Power Measured @ 2200rpm
Max Torque 233.1lb ft 316Nm
Displacement 207.5cu in 3.4L
Alternator 120amps

02 Capacities Specification

Front Axle 335.7cu in 5.5L
Engine Oil With Filter 2.2gal 8L
Fuel Tank 30.2gal 114L
Rear Axle 3.6gal 13.6L

03 Operational Specification

Backhoe Flow- Gallons 28.6gal/min 108L/min

04 Performance Specification

Dipper Stick Lift Capacity 4343.2lb 1970kg
Bucket Digging Force (Iso) 113lb 51.3kg

05 Tires Specification

Front 12L x 16.5 (4WD)
Rear 19.5L - 24 (4WD)

06 Hydraulic Specification

Pump Type Parker P330 Single Selection Gear

07 Brakes Specification

Service Brake Wet Disc

08 Dimensions Dimensions

Transport Length 23.04ft in 7020mm
Transport Width 7.12ft in 2170mm
Transport Height 10.83ft in 3300mm
Height To Top Of Cab 107.09in 2720mm
Wheelbase 4wd 84.65in 2150mm
Operating Weight 16093 lbs (7300) kg (4WD)
Turning Radius 11.32ft in 3450mm

09 Loader Dimensions

Dig Depth 178.75in 4540mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.