Case 580M
The Case 580M is a backhoe loader with an operating weight of 16,510 lb (7,489 kg), a 76 hp engine, a 0.87 yd³ (0.67 m³) bucket, and a dig depth of 14.25 ft (4,340 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Case 580M sits below the median for its class:
- Engine power 76 hp less powerful than 64% (n=282)
- Dig depth 14.3 ft shallower-digging than 69% (n=256)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2239 | |
| Engine Model | Family III 445/M2, Tier II certified | |
| Gross Power | 80hp | 60kw |
| Net Power | 76hp | 57kw |
| Power Measured @ | 2200rpm | |
| Torque Measured @ | 1400rpm | |
| Net Torque Rise | 23% | |
| Net Max Torque | 231lb ft | 314Nm |
| Aspiration | Natural | |
| Displacement | 272cu in | 4.5L |
02 Operational Specification
| Operating Weight 2wd | 13359lb | 6060kg |
|---|---|---|
| Fuel Capacity | 31.4gal | 119L |
| Max Weight | 16510lb | 7489kg |
| Hydraulic System Fluid Capacity | 28gal | 106L |
| Oil System Fluid Capacity | 3.6gal | 13.6L |
| Cooling System Fluid Capacity | 4.5gal | 16.8L |
| Transmission Fluid Capacity | 5.5gal | 20.8L |
| Front Axle Fluid Capacity | 1.5gal | 5.5L |
| Rear Axle Fluid Capacity | 3.8gal | 14.2L |
| Turning Radius | 11ft in | 3350mm |
| Tire Size Front - 2wd / 4wd | 11Lx16.1/12x16.5 | |
| Rear Tires Size 2wd/4wd | 17.5Lx24/19.5Lx24 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 90amps |
03 Transmission Specification
| Transmission Type | 4-speed synchromesh with hydraulically actuated clutches | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 24.5mph | 39.4km/h |
| Max Speed Reverse | 29.6mph | 47.6km/h |
04 Hydraulic Specification
| Pump Type | gear-type, transmission driven | |
|---|---|---|
| Pump Flow Capacity | 28.5gal/min | 108L/min |
05 Backhoe Dimensions
| Load Height - Std | 11.17ft in | 3400mm |
|---|---|---|
| Reach From Swivel - Std | 17.83ft in | 5440mm |
| Dig Depth - Std | 14.25ft in | 4340mm |
| Reach At Load Height - Std | 8.75ft in | 2670mm |
| Load Height - Ext | 13.25ft in | 4040mm |
| Bucket Dig Force - Ext | 11212lb | 5085.68kg |
| Bucket Dig Force - Std | 11212lb | 5085.68kg |
| Dig Depth - Ext | 18.25ft in | 5560mm |
| Reach At Load Height - Ext | 11.5ft in | 3500mm |
| Load At Max Lift - Ext | 810lb | 367kg |
| Load At Max Lift - Std | 1950lb | 885kg |
| Reach From Swivel - Ext | 21.83ft in | 6650mm |
06 Dimensions Dimensions
| Transport Length | 23.17ft in | 7070mm |
|---|---|---|
| Transport Width | 7.17ft in | 2180mm |
| Transport Height | 11.25ft in | 3420mm |
| Wheelbase | 7.04ft in | 2150mm |
| Ground Clearance | 1.24ft in | 376mm |
| Height To Top Of Suspended Cab | 8.92ft in | 2720mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 8.67ft in | 2640mm |
|---|---|---|
| Reach At Max Dump Height ‡ — value corrected — the source published it under the wrong unit | 2.35ft in | 717mm |
| Dig Depth | 7.8in | 199mm |
| Bucket Breakout Force | 9164lb | 40.76kN |
| Bucket Width | 82in | 2080mm |
| Bucket Capacity | 0.87yd3 | 0.67m3 |
| Lift Capacity At Full Height | 6182lb | 2804kg |
Data notes
Corrected value. The source published this figure under the wrong unit. The metric figure is authoritative and the imperial value shown here is derived from it.
- Reach At Max Dump Height: shown as 2.35 ft in (source stated a value inconsistent with its own metric figure of 717 mm)
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.