Specification sheet Backhoe Loader Ref case-580l-loader-backhoe

Case 580L

The Case 580L is a backhoe loader with a 71 hp engine, a 1.03 yd³ (0.79 m³) bucket, and a dig depth of 14.2 ft (4,328.16 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Engine power
71hp
52.95kW
Net Power
Bucket capacity
1.03yd³
0.79m³
Dig depth
14.2ft
4,328.16mm

Where it sits in its classpercentile · backhoe loaders

Among 294 backhoe loaders , the Case 580L sits below the median for its class:

  • Engine power 71 hp less powerful than 70% (n=282)
  • Dig depth 14.2 ft shallower-digging than 71% (n=256)

Scale drawingdrawn to scale · mm

5852B381C6888A
Side elevation
5852B2195D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make Case
Engine Model 4-390
Net Power 71hp 53kw
Gross Power 75hp 56kw
Power Measured @ 2200rpm
Torque Measured @ 1400rpm
Net Max Torque 193lb ft 261.7Nm
Aspiration Turbocharged
Displacement 239cu in 4L
Bore 4.1in 102.2mm
Stroke 4.8in 119.9mm

02 Operational Specification

Fuel Capacity 31.4gal 118.9L
Operating Weight 4wd 12817lb 5813.7kg
Hydraulic System Fluid Capacity 33gal 125L
Cooling System Fluid Capacity 4.4gal 16.5L
Transmission Fluid Capacity 4.9gal 18.5L
Front Axle Fluid Capacity 1.5gal 5.5L
Rear Axle Fluid Capacity 3.9gal 14.5L
Tire Size Front - 2wd / 4wd 11L x 16, 10PR / 12 x 16.5, 8PR
Rear Tires Size 2wd/4wd 17.5L x 24, 10PR / 19.5L x 24, 10PR
Operating Voltage 12V
Alternator Supplied Amperage 65amps

03 Transmission Specification

Transmission Type Fully synchronized 4-speed forward reverse shuttle
Number Of Forward Gears 4
Number Of Reverse Gears 4
Max Speed - Forward 25.5mph 41.1km/h
Max Speed Reverse 30.8mph 49.6km/h

04 Hydraulic Specification

Pump Type Front mounted, positive displacement, gear-type tandem
Pump Flow Capacity 28.5gal/min 107.9L/min
Relief Valve Pressure 3000psi 20684.3kPa

05 Backhoe Dimensions

Load Height - Std 11.2ft in 3413.76mm
Reach From Swivel - Std 17.11ft in 5212.08mm
Dig Depth - Std 14.2ft in 4328.16mm
Reach At Load Height - Std 8.9ft in 2712.72mm
Load At Max Lift - Std 1951lb 884.96kg
Bucket Dig Force - Ext 10976lb 4978.64kg
Bucket Dig Force - Std 10976lb 4978.64kg
Dig Depth - Ext 18.2ft in 5547.36mm
Reach At Load Height - Ext 11.2ft in 3413.76mm
Load At Max Lift - Ext 1401lb 635.49kg
Load Height - Ext 13.3ft in 4053.84mm
Reach From Swivel - Ext 21.1ft in 6431.28mm

06 Dimensions Dimensions

Transport Length 22.6ft in 6888.48mm
Transport Width 7.2ft in 2194.56mm
Transport Height 19.2ft in 5852.16mm
Wheelbase 7ft in 2133.6mm
Ground Clearance 1.25ft in 381mm
Rear Wheel Tread Width - Min 61.2in 1554.48mm
Height To Top Of Suspended Cab 8.11ft in 2471.93mm
Front Wheel Tread Width 67.3in 1709.42mm

07 Loader Dimensions

Clearance At Max Dump Height 8.81ft in 2682.24mm
Reach At Max Dump Height 2.16ft in 657.86mm
Dig Depth 7.8in 198.12mm
Bucket Breakout Force 7956lb 35.4kN
Bucket Width 82in 2080mm
Bucket Capacity 1.03yd3 0.79m3
Lift Capacity At Full Height 5293lb 2400.87kg

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.