Case 580K
The Case 580K is a backhoe loader with a 68.4 hp engine, a 1.99 yd³ (1.53 m³) bucket, and a dig depth of 14.6 ft (4,450.08 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · backhoe loaders
Among 294 backhoe loaders , the Case 580K sits below the median for its class:
- Engine power 68 hp less powerful than 75% (n=282)
- Dig depth 14.6 ft deeper-digging than 53% (n=256)
◇Scale drawingdrawn to scale · mm
Envelope assembled from published extents that may reflect different machine configurations (e.g. transport length with operating height).
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Case | |
| Engine Model | 4-390 | |
| Gross Power | 63.1hp | 47kw |
| Net Power | 68.4hp | 51kw |
| Power Measured @ | 2200rpm | |
| Torque Measured @ | 1200rpm | |
| Net Max Torque | 186lb ft | 252.2Nm |
| Aspiration | Turbocharged | |
| Displacement | 239cu in | 4L |
| Bore | 4.1in | 102.2mm |
| Stroke | 4.8in | 119.9mm |
02 Operational Specification
| Operating Weight 2wd | 8785lb | 3984.9kg |
|---|---|---|
| Fuel Capacity | 25gal | 94.7L |
| Operating Weight 4wd | 9185lb | 4166.3kg |
| Hydraulic System Fluid Capacity | 21.5gal | 81.4L |
| Oil System Fluid Capacity | 2.9gal | 10.9L |
| Cooling System Fluid Capacity | 4.5gal | 17L |
| Tire Size Front - 2wd / 4wd | 11L x 16 | |
| Rear Tires Size 2wd/4wd | 17.5L x 24 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 65amps |
03 Transmission Specification
| Transmission Type | Fully synchronized 4-speed forward reverse shuttle | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21.8mph | 35.1km/h |
| Max Speed Reverse | 19.6mph | 31.6km/h |
04 Hydraulic Specification
| Pump Type | Front mounted, positive displacement, gear-type tandem | |
|---|---|---|
| Pump Flow Capacity | 26gal/min | 98.5L/min |
| Relief Valve Pressure | 2550psi | 17581.7kPa |
05 Backhoe Dimensions
| Load Height - Std | 10.6ft in | 3230.88mm |
|---|---|---|
| Reach From Swivel - Std | 18ft in | 5486.4mm |
| Dig Depth - Std | 14.6ft in | 4450.08mm |
| Reach At Load Height - Std | 6.3ft in | 1920.24mm |
| Bucket Dig Force - Std | 9800lb | 4445.21kg |
| Bucket Dig Force - Ext | 9800lb | 4445.21kg |
| Reach From Swivel - Ext | 21.1ft in | 6431.28mm |
| Dig Depth - Ext | 18.11ft in | 5516.88mm |
| Reach At Load Height - Ext | 10ft in | 3048mm |
| Load Height - Ext | 12.1ft in | 3688.08mm |
06 Dimensions Dimensions
| Transport Length | 16.9ft in | 5151.12mm |
|---|---|---|
| Transport Width | 6.81ft in | 2075.18mm |
| Wheelbase | 7ft in | 2133.6mm |
| Ground Clearance | 1.17ft in | 356mm |
| Height To Top Of Suspended Cab | 8.95ft in | 2727.96mm |
| Rear Wheel Tread Width - Min | 62in | 1574.8mm |
| Front Wheel Tread Width | 67.5in | 1714.5mm |
07 Loader Dimensions
| Clearance At Max Dump Height | 9.2ft in | 2804.16mm |
|---|---|---|
| Reach At Max Dump Height | 1.75ft in | 533.4mm |
| Dig Depth | 4.2in | 106.68mm |
| Lift Capacity At Full Height | 5500lb | 2494.76kg |
| Bucket Capacity | 1.99yd3 | 1.53m3 |
| Bucket Width | 82in | 2082.81mm |
| Bucket Breakout Force | 8100lb | 36.04kN |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.